Window Blind Safety Information

..Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.

There are no products available in this category.

 
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NV003C- Clear Plastic Vertical Slat Fabric Insert
1 x Part NV004- (Qty. 50)Vertical Slat Fabric Insert 3 3/8" Wide
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NV002D - Wand Control
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part NV031 -Replacement Stem (Qyt 1 Stem Only)
1 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x #0.9mm-C-Vanilla Shade Cord(75 Feet Per Order)
1 x #2.7mm-E-Dark Walnut Cord(50 Feet Per Order)
1 x Part NM040J- Valance Clip (Quantity 15)
1 x # Threading Tool
1 x #1.8mm-K-Black Blind Cord (75 Feet Per Order)
1 x #2.7mm-A11- Alabaster Blind Cord (50 Feet Per Order)
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x Part NP02- C Clamp For Cord Loop System
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NP75 White Motor (no returns)
1 x #0.9mm-D-Sand Shade Cord(75 Feet Per Order)
1 x Part NP05A Cord Wedge
1 x #1.4mm-B1-Alabaster Blind Cord (75 Feet Per Order)
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NV002 Vertical Track End Control
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part NR09A Small Cord Guide (screws not included)
1 x Part SVS6 White End Cap(1 pair)
1 x Part NV031B-Metal Link For 3dayblind Carrier
1 x Part NV001-100 Clips(no returns)
1 x #0.9mm-B1-Alabaster Shade Cord(75 Feet Per Order)
1 x Part SVS92 White End Cap(1 pair)
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
$436.37

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts