Window Blind Safety Information

..Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.

There are no products available in this category.

 
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NM008 - Wand Tilter
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part 30A Brown Bracket LP (screws not included)
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part 25 Small Installation Backet (screws not included)
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NM012A Cord Tilter High Profile
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM013C- 2" Wand Tilter
1 x Part NM038D - 1" Wand Tilter
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part NM031C-1" Wand Tilter A
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part 36 Pleated Shade Bracket (1)
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NM013D Wand Tilter
1 x Part 32A Vertical Track Bracket
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM024- Mini Blind Cord Lock
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
$597.31

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts