Window Blind Safety Information

..Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.

There are no products available in this category.

 
1 x Part NV015- Top Plug For Vertical Fabric
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
3 x Part NR02- (Qty 6) Roman Shade Lock- 3 guides(screws not include
2 x Part NV003- Small Vertical Track End Control
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NM035- 1 Inch Wand Tilter Left Side
2 x #1.8mm-B1-Alabaster Blind Cord(75 Feet Per Order)
2 x Part 26 Large Installation Bracket (screws not included)
2 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
2 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
3 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
3 x Part NP71A-Left Side Blue Cord Clutch
2 x Part NV029-(Qty 7) Valance Clip Fits On Top Of A 1 7/8" Headrai
2 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
2 x #0.9mm-D-Sand Shade Cord(75 Feet Per Order)
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
3 x Part NM005B Cord Tilter Fits Hex Rod
1 x #1.8mm-I-Medium Walnut Cord (75 Feet Per Order)
3 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NR03- (Qty2)Clear Plastic Bar Eyelet
1 x #1.8mm-H-Oak Blind Cord (75 Feet Per Order)
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
2 x Part NV004- (Qty. 50)Vertical Slat Fabric Insert 3 3/8" Wide
1 x Part NP44- Shaft And Connector For Ultraglide Shade
2 x Part NR01 (Qty10)Brown Cord Lock 3 Guides (screws not included)
2 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part NV016-2.2 mm Track Cord (100 Feet per Order)
1 x #1.8mm-A-White Blind Cord (75 Feet Per Order)
1 x Part NM038E - 1" Wand Tilter
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
2 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x YNP01A Right Side Cord lock (White Only)
1 x #1.4mm-D-Sand Blind Cord (75 Feet Per Order)
2 x Part NV023A-(Qty 3)Decomatic Vertical Carrier
1 x #1.2mm-A-White Blind Cord (75 Feet Per Order)
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NP07A Wear Bar
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x #0.9mm-M1-Red Shade Cord(75 Feet Per Order)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
2 x Part NV029J Valance Clips 3 per Order
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x #2.7mm-D-Medium Walnut Cord (50 Feet Per Order)
1 x Part SVS6 White End Cap(1 pair)
2 x Part NV031B-Metal Link For 3dayblind Carrier
1 x Part NP66 Right Side Black Motor (no returns or refunds)
2 x Part NP65 Right Side Blue Motor (no returns or refunds)
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
2 x Part NV017A-Open Bead For 2.2mm Vertical Cord
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x Part NV002B Vertical Track End Control Notchless
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
3 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
2 x Part NV003C- Clear Plastic Vertical Slat Fabric Insert
3 x #0.9mm-F11-Smokey Gray Shade Cord (75 Feet Per Order)
1 x Part NP36A Clear Plastic Plug
1 x YNP01EF-Metal Cord Guide
1 x Part 08- Silhouette Installation Bracket (screws not included)
1 x Part NV030A- Valance Corner
2 x #1.8mm-J-Dark Walnut Cord (75 Feet Per Order)
1 x Part NV029G-(Qty 4) Valance Clip
1 x Part NP05A Cord Wedge
1 x Part NV002A-(Qty 5) Carrier With Plastic Scissors Black Wheels
1 x Part NM012A Cord Tilter High Profile
2 x Part NV023C-(Qty 2)Vertical Clip And Base
1 x Part NV014A- White Vertical Repair Clip
2 x #1.4mm-C-Vanilla Blind Cord (75 Feet Per Order)
2 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
2 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NR09A Small Cord Guide (screws not included)
2 x Part SVS92 White End Cap(1 pair)
1 x Part NV003B- (Qty 10)Small Vertical Track Carrier
2 x Part NM013D- Compatible Tilter Ships Out
1 x Part NV029F-(Qty 5) Valance Clip 1 1/2" Rail
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NR09 Cord Guide (screws not included)
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
2 x Part NV005B- Vertical End Cap For Hunter Douglas
1 x Part NM038C - 1' Wand Tilter
2 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
2 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x #1.8mm-K-Black Blind Cord (75 Feet Per Order)
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NP39- Tan Motor For Cordless Blind(no returns)
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part NR09C #10 Plastic Connector( Qty. 20 per Order)
1 x Part NV002C End Control With Chain
1 x Part- NM087 Mini Blind Bottom Rail Plug
2 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NV001A Fabric Weight
1 x #1.8mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x Part NM014A- Wand Tilter For 2" High Profile
3 x Part NM008 - Wand Tilter
2 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part 36 Pleated Shade Bracket (1)
1 x Part NM013C- 2" Wand Tilter
1 x Part NM014B- Cord Tilter Fits Triangle Rod
2 x # Threading Tool
1 x Part NP76 Grey Motor (no returns)
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x Part 34 Installation Bracket
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
2 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
2 x Part NV002D - Wand Control
1 x Part 33A Vertical Track Bracket
2 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part 07- Installation Bracket (screws not included)
1 x #2.7mm-A11- Alabaster Blind Cord (50 Feet Per Order)
2 x Part NV029H-(Qty 5) Valance Clip
1 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x Part NR09B #10 Plastic Beaded Chain (100 Feet per Order)
1 x Part NV027-#10 Vertical Chain Connector
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x White Cord Loop B (4 Feet Tall) Click Here For More Information
1 x Part NM024- Mini Blind Cord Lock
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x White - Cord Loop B(5 Feet Tall) Click Here For More Information
1 x #White CordLoop A - 6 Feet Tall -Click Here For More Information
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x Part NM037 Cord Tilter For 1" Blind
1 x #2.7mm-A3- Sand Blind Cord (50 Feet Per Order)
1 x #1.4mm-H-Medium Walnut Cord(75 Feet Per Order)
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NM011- Wand Tilter For 1" Blind
1 x #1.8mm-D-Sand Blind Cord(75 Feet Per Order)
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x Part NV001-100 Clips(no returns)
1 x Part NV021a- Vertical Stopper
1 x #0.9mm-A-White Pleated Shade Cord-(75 Feet Per Order)
1 x Part 30A Brown Bracket LP (screws not included)
$1,904.46

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts