Window Blind Safety Information

..Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.

There are no products available in this category.

 
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NM013D Wand Tilter
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part 26 Large Installation Bracket (screws not included)
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NM008 - Wand Tilter
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
1 x Part 30A Brown Bracket LP (screws not included)
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NM012A Cord Tilter High Profile
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part 34 Installation Bracket
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NM038E - 1" Wand Tilter
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part NM024- Mini Blind Cord Lock
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part 33A Vertical Track Bracket
1 x Part NM013C- 2" Wand Tilter
1 x Part 07A- (Qty 1) Pleated Shade Bracket (screws not included)
1 x Part 25 Small Installation Backet (screws not included)
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM031C-1" Wand Tilter A
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NM038D - 1" Wand Tilter
1 x Part 32A Vertical Track Bracket
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM011- Wand Tilter For 1" Blind
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NM014B- Cord Tilter Fits Triangle Rod
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part 08- Silhouette Installation Bracket (screws not included)
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NM040H- Valance Clip (Quantity 15)
$735.12

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts