Window Blind Safety Information

..Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.

There are no products available in this category.

 
1 x Part NM038E - 1" Wand Tilter
1 x Part NP07A Wear Bar
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NM008 - Wand Tilter
1 x YNP01E-Del Mar Vanilla Left Side
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x ANP10A - White Right Side Body Cover
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part NP36B White Plastic Plug
1 x Part NP72G-White Left Side End Cap
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NM024- Mini Blind Cord Lock
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part NM011- Wand Tilter For 1" Blind
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x Part NP62 cord guide
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NP36C Off White Plastic Plug
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP75 White Motor (no returns)
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part NP71A-Left Side Blue Cord Clutch
1 x Part NP05A Cord Wedge
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x ANP11A - Vanilla Left Side Lock Body
1 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x Part NP66 Right Side Black Motor (no returns or refunds)
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NP71 Off White Left Cord Clutch Cover
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NP72H-White Right Side End Cap
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part NP16B Tape Only (160 feet)
1 x YNP01G-(1)Cord Guide
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x YNP01C Left Side Cord lock (White only)
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x YNP01A Right Side Cord lock (White Only)
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NP72F-Vanilla Left Side End Cap
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NM014B- Cord Tilter Fits Triangle Rod
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x Part NP23 (Qty 1) Clutch Cover
1 x Part NP02- C Clamp For Cord Loop System
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part NM012A Cord Tilter High Profile
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM031C-1" Wand Tilter A
1 x Part NM013D Wand Tilter
1 x Part NM038C - 1' Wand Tilter
$1,385.91

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts