Window Blind Safety Information

..Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.

There are no products available in this category.

 
1 x Part NM011- Wand Tilter For 1" Blind
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM031C-1" Wand Tilter A
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part NM008 - Wand Tilter
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NM038D - 1" Wand Tilter
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
$309.66

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts