Window Blind Safety Information

..Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.

There are no products available in this category.

 
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part NM013C- 2" Wand Tilter
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM013D Wand Tilter
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part NM012A Cord Tilter High Profile
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM017 Cord Tilter Fits Square Rod
$224.70

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts