Window Blind Safety Information

..Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.

There are no products available in this category.

 
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NM024- Mini Blind Cord Lock
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part NM011- Wand Tilter For 1" Blind
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM013C- 2" Wand Tilter
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NM014B- Cord Tilter Fits Triangle Rod
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part NM038D - 1" Wand Tilter
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part NM013D Wand Tilter
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NM008 - Wand Tilter
1 x Part NM031C-1" Wand Tilter A
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part NM038E - 1" Wand Tilter
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NM038C - 1' Wand Tilter
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NM043A-Loop Type Wand Tilter
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NM012A Cord Tilter High Profile
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM015- White Wand Tilter For One Inch blind
$811.10

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts