Window Blind Safety Information

..Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.

There are no products available in this category.

 
1 x Part NM013D Wand Tilter
1 x Part NP72I White Right Cord Clutch Cover
1 x Part NP71 Off White Left Cord Clutch Cover
1 x Part NP16B Tape Only (160 feet)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x ANP11B - White Left Side Lock Body
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NP72B-Right Side Blue Cord Clutch
1 x Part NP36A Clear Plastic Plug
1 x Part NP37A- Motor Lock
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM038C - 1' Wand Tilter
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x Part NP65 Right Side Blue Motor (no returns or refunds)
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x ANP10A - White Right Side Body Cover
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x YNP01E-Del Mar Vanilla Left Side
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x Part NM011- Wand Tilter For 1" Blind
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NP07A Wear Bar
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NM024- Mini Blind Cord Lock
1 x Part NP72F-Vanilla Left Side End Cap
1 x Part NP72G-White Left Side End Cap
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part NP71A-Left Side Blue Cord Clutch
1 x ANP11A - Vanilla Left Side Lock Body
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM014B- Cord Tilter Fits Triangle Rod
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x Part NP39- Tan Motor For Cordless Blind(no returns)
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NP72J White Left Cord Clutch Cover
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NP36C Off White Plastic Plug
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x Part NM038D - 1" Wand Tilter
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NP62 cord guide
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NM013C- 2" Wand Tilter
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NM038E - 1" Wand Tilter
1 x Part NM031C-1" Wand Tilter A
1 x Part NP02- C Clamp For Cord Loop System
1 x Part NP66 Right Side Black Motor (no returns or refunds)
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NP16A- Plug For Easy Rise Tape
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x YNP01G-(1)Cord Guide
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part NP36B White Plastic Plug
1 x Part NP72H-White Right Side End Cap
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP39A stopper
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NP23 (Qty 1) Clutch Cover
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part NM008 - Wand Tilter
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x YNP01A Right Side Cord lock (White Only)
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x YNP01B Left Side Cord lock (White only)
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x YNP01D-Right Del Mar Green Lock
1 x YNP01C Left Side Cord lock (White only)
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NP72D-Off White Right Side End Cap
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part NP76 Grey Motor (no returns)
1 x Part NM012A Cord Tilter High Profile
1 x Part NP05A Cord Wedge
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
$1,654.69

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts