Window Blind Safety Information

..Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.

There are no products available in this category.

 
1 x Part NM011- Wand Tilter For 1" Blind
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM038E - 1" Wand Tilter
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NM013D Wand Tilter
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NM024- Mini Blind Cord Lock
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NM008 - Wand Tilter
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM012A Cord Tilter High Profile
1 x Part NM038D - 1" Wand Tilter
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NM038C - 1' Wand Tilter
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part NM031C-1" Wand Tilter A
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
$801.10

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts