Window Blind Safety Information

..Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.

There are no products available in this category.

 
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x #2.2mm*Vertical Track Cord* (50 Feet Per Order)
1 x #2.7mm-B-Oak Blind Cord (50 Feet Per Order)
2 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x Part NR02- (Qty 6) Roman Shade Lock- 3 guides(screws not include
1 x Part NM039-Barrel and Cradle For 1" Blind
2 x Part NV031 -Replacement Stem (Qyt 1 Stem Only)
1 x #0.9mm-Q-Black Shade Cord (75 Feet Per Order)
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part NP44- Shaft And Connector For Ultraglide Shade
2 x Part NM013C- 2" Wand Tilter
1 x Part NV009- Vertical Track Laserlite Barrel For End Control
1 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
2 x Part NM036- Right Side 1 Inch Tilter
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x White - Cord Loop B(5 Feet Tall) Click Here For More Information
2 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x YNP01D-Right Del Mar Green Lock
1 x Part 07A- (Qty 1) Pleated Shade Bracket (screws not included)
2 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part NM012A Cord Tilter High Profile
1 x #0.9mm-L1-Indigo Blue Cord(75 Feet Per Order)
1 x Part NV027-#10 Vertical Chain Connector
1 x Part NV002 Vertical Track End Control
2 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x #1.8mm-J-Dark Walnut Cord (75 Feet Per Order)
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NR01 (Qty10)Brown Cord Lock 3 Guides (screws not included)
1 x # Threading Tool
1 x Part NP66 Right Side Black Motor (no returns or refunds)
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x #1.8mm-A-White Blind Cord (75 Feet Per Order)
2 x Part NV030A- Valance Corner
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x #0.9mm-N-Dark Brown Cord (75 Feet Per Order)
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x Part NV007- Vertical Track Kirsch Carrier(Salvaged Part)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
2 x #1.4mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x Part NP72B-Right Side Blue Cord Clutch
2 x Part NP39- Tan Motor For Cordless Blind(no returns)
1 x Part NM024- Mini Blind Cord Lock
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
2 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x #0.9mm-B1-Alabaster Shade Cord(75 Feet Per Order)
2 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NV029D (Qty 3) Valance Clip
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part 26 Large Installation Bracket (screws not included)
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NV002D - Wand Control
1 x #1.8mm-K-Black Blind Cord (75 Feet Per Order)
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x #White CordLoop A - 6 Feet Tall -Click Here For More Information
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x YNP01EF-Metal Cord Guide
2 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NV002-Discontinued (A Compatible Control) Will Ship Out
1 x Part NV029G-(Qty 4) Valance Clip
1 x Part NV023A-(Qty 3)Decomatic Vertical Carrier
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part NM017 Cord Tilter Fits Square Rod
1 x #1.2mm-A-White Blind Cord (75 Feet Per Order)
1 x YNP01B Left Side Cord lock (White only)
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NV014A- White Vertical Repair Clip
1 x White Cord Loop B (4 Feet Tall) Click Here For More Information
1 x Part NV003C- Clear Plastic Vertical Slat Fabric Insert
1 x Part NV034 Luminette End Control Stem and Gear
1 x Part NP75 White Motor (no returns)
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part SVS6 White End Cap(1 pair)
1 x Part SVS92 White End Cap(1 pair)
$1,056.38

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts