Window Blind Safety Information

..Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.

There are no products available in this category.

 
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NM038D - 1" Wand Tilter
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NM038E - 1" Wand Tilter
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NM003B 2" Wand Tilter Zinc Loop
$272.67

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts