$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
2 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x #1.2 mm cord size (click here for more information)
1 x #1.8mm-I-Medium Walnut Cord (75 Feet Per Order)
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM008 - Wand Tilter
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x #0.9mm-N-Dark Brown Cord (75 Feet Per Order)
2 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
2 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
2 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x #0.9mm-D-Sand Shade Cord(75 Feet Per Order)
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NM024- Mini Blind Cord Lock
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NM036- Right Side 1 Inch Tilter
1 x #1.4mm-D-Sand Blind Cord (75 Feet Per Order)
1 x #1.4mm-F-Oak Blind Cord(75 Feet Per Order)
2 x #1.8mm-B1-Alabaster Blind Cord(75 Feet Per Order)
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x #0.9mm-C-Vanilla Shade Cord(75 Feet Per Order)
1 x #0.9mm-Q-Black Shade Cord (75 Feet Per Order)
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NV002 Vertical Track End Control
1 x #1.8mm-D-Sand Blind Cord(75 Feet Per Order)
1 x # Threading Tool
2 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NV029-(Qty 7) Valance Clip Fits On Top Of A 1 7/8" Headrai
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x #0.9mm-H-Peach Blush Cord(75 Feet Per Order)
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x #1.8mm-K-Black Blind Cord (75 Feet Per Order)
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x #1.8mm-A-White Blind Cord (75 Feet Per Order)
1 x Part NV004A- Plastic Link For Carrier 3 5/16" Long
1 x #0.9mm-A-White Pleated Shade Cord-(75 Feet Per Order)
1 x #1.4mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
2 x Part NM012A Cord Tilter High Profile
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
2 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x #1.4mm-HH-Dark Walnut Cord(75 Feet Per Order)
1 x #2.7mm-B-Oak Blind Cord (50 Feet Per Order)
1 x Part NM038D - 1" Wand Tilter
1 x #White CordLoop A - 6 Feet Tall -Click Here For More Information
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM005D Cord Tilter For 2" Blind
1 x #2.2mm*Vertical Track Cord* (50 Feet Per Order)
1 x #2.7mm-A11- Alabaster Blind Cord (50 Feet Per Order)
1 x #1.8mm-H-Oak Blind Cord (75 Feet Per Order)
1 x Part NV005B- Vertical End Cap For Hunter Douglas
1 x #2.7mm-E-Dark Walnut Cord(50 Feet Per Order)
1 x Part NV002A2 (Qty 5) Carrier With Plastic Scissors Blue Wheels
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NV030A- Valance Corner
$600.72
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts