$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NV029-(Qty 7) Valance Clip Fits On Top Of A 1 7/8" Headrai
1 x Part NV037 Click On Picture For Information(Qty 5 Per Order)
1 x Part NV001-100 Clips(no returns)
1 x Part NV029A (Qty 3) Valance clip
1 x Part NV007- Vertical Track Kirsch Carrier(Salvaged Part)
1 x Part NV029F-(Qty 5) Valance Clip 1 1/2" Rail
1 x Part NV028-(Qty 7) Clip Fits 1 1/2" Headrail
1 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x Part NV014B- Clear Plastic Slat Repair Tab
1 x Part NV003B- (Qty 10) Graber Small Vertical Track Carrier
1 x Part NR08 Plastic Sew On Ring 5/8"
1 x Part NV038 Vertical Track Carrier (Qty 1 Per Order)
1 x Part 07A- (Qty 1) Pleated Shade Bracket (screws not included)
1 x Part 08- Silhouette Installation Bracket (screws not included)
1 x Part NV029H-(Qty 5) Valance Clip
1 x Part NV030A- Valance Corner
1 x Part NV012B1- Plastic Link
1 x Part NR09C #10 Plastic Connector( Qty. 20 per Order)
1 x Part NV005- Carrier Uses Plastic Link
1 x Part NV004B- Plastic Link For Carrier 3 5/8" Long
1 x Part 07- Installation Bracket (screws not included)
1 x Part NV023A-(Qty 3)Decomatic Vertical Carrier
1 x Part NR09B #10 Plastic Beaded Chain (100 Feet per Order)
1 x Part NV029D (Qty 3) Valance Clip
1 x Part NR01 (Qty10)Brown Cord Lock 3 Guides (screws not included)
1 x Part NR03- (Qty2)Clear Plastic Bar Eyelet
1 x Part 30A Brown Bracket LP (screws not included)
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM024- Mini Blind Cord Lock
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NM013D Wand Tilter
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM012A Cord Tilter High Profile
$515.10
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts