$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x YNP01B Left Side Cord lock (White only)
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NP72G-White Left Side End Cap
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part NP76 Grey Motor (no returns)
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part 36 Pleated Shade Bracket (1)
1 x Part NP36A Clear Plastic Plug
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x Part 07A- (Qty 1) Pleated Shade Bracket (screws not included)
1 x Part NP23 (Qty 1) Clutch Cover
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NM012A Cord Tilter High Profile
1 x Part 25 Small Installation Backet (screws not included)
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part 30A Brown Bracket LP (screws not included)
1 x Part 34 Installation Bracket
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x ANP11A - Vanilla Left Side Lock Body
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x #0.9mm-C-Vanilla Shade Cord(75 Feet Per Order)
1 x Part NV021- Lock Washer
1 x Part NR09C #10 Plastic Connector( Qty. 20 per Order)
$439.36
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts