$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part 36 Pleated Shade Bracket (1)
1 x Part 08- Silhouette Installation Bracket (screws not included)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NM012A Cord Tilter High Profile
1 x Part NM008 - Wand Tilter
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part NR09A Small Cord Guide (screws not included)
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NM038E - 1" Wand Tilter
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part 32A Vertical Track Bracket
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part 26 Large Installation Bracket (screws not included)
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part 07A- (Qty 1) Pleated Shade Bracket (screws not included)
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part 33A Vertical Track Bracket
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
1 x ANP11A - Vanilla Left Side Lock Body
1 x Part NV015- Top Plug For Vertical Fabric
1 x Part NV030- Valance Corner
1 x Part NV028-(Qty 7) Clip Fits 1 1/2" Headrail
1 x YNP01D-Right Del Mar Green Lock
1 x Part NV007- Vertical Track Kirsch Carrier(Salvaged Part)
1 x Part NV037 Click On Picture For Information(Qty 5 Per Order)
1 x Part NP36B White Plastic Plug
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part NV014B- Clear Plastic Slat Repair Tab
1 x Part NV002D - Wand Control
1 x Part NV005B- Vertical End Cap For Hunter Douglas
1 x Part NP39A stopper
1 x Part NP37A- Motor Lock
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x YNP01A Right Side Cord lock (White Only)
1 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x Part NV009- Vertical Track Laserlite Barrel For End Control
1 x Part NV012B1- Plastic Link
1 x YNP01EF-Metal Cord Guide
1 x Part NV010- Vertical Track Sprocket (Qty 1)
1 x Part NV004- (Qty. 50)Vertical Slat Fabric Insert 3 3/8" Wide
1 x Part NV029G-(Qty 4) Valance Clip
1 x Part NP72J White Left Cord Clutch Cover
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x Part NP76 Grey Motor (no returns)
1 x ANP10A - White Right Side Body Cover
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x Part NV001A Fabric Weight
1 x Part NV014- Silver Vertical Repair Clip
1 x Part NV001-100 Clips(no returns)
1 x Part NV023- Vertical End Cap
1 x Part NV002A2 (Qty 5) Carrier With Plastic Scissors Blue Wheels
1 x Part NV004B- Plastic Link For Carrier 3 5/8" Long
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NP66 Right Side Black Motor (no returns or refunds)
1 x Part NV023A-(Qty 3)Decomatic Vertical Carrier
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x #1.4 mm cord size (click here for more information)
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x #1.8 mm cord size (click here for more information)
1 x #1.4mm-HH-Dark Walnut Cord(75 Feet Per Order)
1 x #1.8mm-D-Sand Blind Cord(75 Feet Per Order)
1 x #1.4mm-D-Sand Blind Cord (75 Feet Per Order)
1 x #1.4mm-A-White Blind Cord (75 Feet Per Order)
1 x #2.7mm-E-Dark Walnut Cord(50 Feet Per Order)
1 x #0.9mm-N-Dark Brown Cord (75 Feet Per Order)
1 x Go To Roman And Woven Wood Parts
$880.12
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts