$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NV023A-(Qty 3)Decomatic Vertical Carrier
1 x Part 36 Pleated Shade Bracket (1)
1 x Part NV029F-(Qty 5) Valance Clip 1 1/2" Rail
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part NM038E - 1" Wand Tilter
1 x Part NM004A-Hunter Douglas Cord Tilter
1 x Part NM013D Wand Tilter
1 x Part 07A- (Qty 1) Pleated Shade Bracket (screws not included)
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NV005- Carrier Uses Plastic Link
1 x Part NV029A (Qty 3) Valance clip
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part NM012A Cord Tilter High Profile
1 x Part NV007- Vertical Track Kirsch Carrier(Salvaged Part)
1 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x Part NV026- #10 Vertical Chain $.99 Per Foot
1 x Part NV017A-Open Bead For 2.2mm Vertical Cord
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NV031B-Metal Link For 3dayblind Carrier
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NV004A- Plastic Link For Carrier 3 5/16" Long
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NV003B- (Qty 10) Graber Small Vertical Track Carrier
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part 08- Silhouette Installation Bracket (screws not included)
1 x Part NV037 Click On Picture For Information(Qty 5 Per Order)
1 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part NV029G-(Qty 4) Valance Clip
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NV027-#10 Vertical Chain Connector
1 x Part NV021a- Vertical Stopper
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NV002C End Control With Chain
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NV030A- Valance Corner
1 x Part NV038 Vertical Track Carrier (Qty 1 Per Order)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM038D - 1" Wand Tilter
1 x Part NV029H-(Qty 5) Valance Clip
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NV021B - Decomatic Black Lock Washer
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NM008 - Wand Tilter
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x Part NV014A- White Vertical Repair Clip
1 x Part 25 Small Installation Backet (screws not included)
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NV003- Graber Small Vertical Track End Control
1 x Part NM004A-Discontinued (new version will ship out)
1 x Part NV012B1- Plastic Link
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NV002-Discontinued (A Compatible Control) Will Ship Out
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM013C- 2" Wand Tilter
1 x Part NM024- Mini Blind Cord Lock
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
1 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NV010- Vertical Track Sprocket (Qty 1)
1 x Part 34 Installation Bracket
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NV014- Silver Vertical Repair Clip
1 x Part NV002D - Wand Control
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NV023- Vertical End Cap
1 x Part NV030- Valance Corner
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NV002 Vertical Track End Control
1 x Part NV002A3 (Qty 2) Carrier With Plastic Scissors White Wheels
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x YNP01E-Del Mar Vanilla Left Side
1 x YNP01C Left Side Cord lock (White only)
1 x Part NP72B-Right Side Blue Cord Clutch
1 x #2.7mm-E-Dark Walnut Cord(50 Feet Per Order)
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x #2.7mm-D-Medium Walnut Cord (50 Feet Per Order)
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
$1,012.51
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts