$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NV021a- Vertical Stopper
1 x Part NV029H-(Qty 5) Valance Clip
1 x #1.4mm-A-White Blind Cord (75 Feet Per Order)
2 x #2.7mm-D-Medium Walnut Cord (50 Feet Per Order)
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x #1.8mm-H-Oak Blind Cord (75 Feet Per Order)
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NP62 cord guide
1 x ANP11A - Vanilla Left Side Lock Body
1 x #1.4mm-H-Medium Walnut Cord(75 Feet Per Order)
1 x #1.2 mm cord size (click here for more information)
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NP72B-Right Side Blue Cord Clutch
1 x YNP01EF-Metal Cord Guide
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x #2.7 mm cord size (click here for more information)
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NV001-100 Clips(no returns)
1 x Part NV037 Click On Picture For Information(Qty 5 Per Order)
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x #1.4 mm cord size (click here for more information)
1 x #2.2mm*Vertical Track Cord* (50 Feet Per Order)
1 x #0.9mm-Q-Black Shade Cord (75 Feet Per Order)
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x YNP01D-Right Del Mar Green Lock
1 x Part NP36A Clear Plastic Plug
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NV005B- Vertical End Cap For Hunter Douglas
1 x Part NP39- Tan Motor For Cordless Blind(no returns)
1 x Part NP71 Off White Left Cord Clutch Cover
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x #1.4mm-B1-Alabaster Blind Cord (75 Feet Per Order)
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x Part NP72I White Right Cord Clutch Cover
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NV003- Graber Small Vertical Track End Control
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x Part NP72H-White Right Side End Cap
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NV034 Luminette End Control Stem and Gear
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Go To Roman And Woven Wood Parts
1 x White Cord Loop B (4 Feet Tall) Click Here For More Information
1 x Part NP23 (Qty 1) Clutch Cover
1 x Part NM013C- 2" Wand Tilter
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part NM040G- Valance Clip (Quantity 15)
1 x #2.7mm-A11- Alabaster Blind Cord (50 Feet Per Order)
1 x Part NV029F-(Qty 5) Valance Clip 1 1/2" Rail
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NM031C-1" Wand Tilter A
1 x Part NV015- Top Plug For Vertical Fabric
1 x YNP01B Left Side Cord lock (White only)
1 x #2.7mm-A3- Sand Blind Cord (50 Feet Per Order)
1 x Part NV023- Vertical End Cap
1 x Part NV030- Valance Corner
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x #0.9mm-H-Peach Blush Cord(75 Feet Per Order)
1 x #0.9mm-G-Pink Shade Cord(75 Feet Per Order)
1 x #0.9mm-L1-Indigo Blue Cord(75 Feet Per Order)
1 x #1.8mm-I-Medium Walnut Cord (75 Feet Per Order)
1 x Part NM038D - 1" Wand Tilter
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part NV001A Fabric Weight
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x YNP01C Left Side Cord lock (White only)
1 x Part NV030A- Valance Corner
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NP76 Grey Motor (no returns)
1 x Part NP72J White Left Cord Clutch Cover
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part NP16A- Plug For Easy Rise Tape
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part NP37A- Motor Lock
1 x Part NM008 - Wand Tilter
$885.16
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts