$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NM043A-Loop Type Wand Tilter
1 x #0.9mm-H-Peach Blush Cord(75 Feet Per Order)
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NP23 (Qty 1) Clutch Cover
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x #1.2mm-A-White Blind Cord (75 Feet Per Order)
1 x #1.4mm-HH-Dark Walnut Cord(75 Feet Per Order)
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x #1.4mm-F-Oak Blind Cord(75 Feet Per Order)
1 x #1.8 mm cord size (click here for more information)
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x #1.4mm-D-Sand Blind Cord (75 Feet Per Order)
1 x YNP01C Left Side Cord lock (White only)
1 x Part NP07A Wear Bar
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x #0.9mm-L1-Indigo Blue Cord(75 Feet Per Order)
1 x #2.7 mm cord size (click here for more information)
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM008 - Wand Tilter
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x #0- 0.9mm Cord Size and Safety (click here for more information
1 x YNP01G-(1)Cord Guide
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NP72F-Vanilla Left Side End Cap
1 x #1.8mm-B1-Alabaster Blind Cord(75 Feet Per Order)
1 x Part NM040J- Valance Clip (Quantity 15)
1 x #1.8mm-A-White Blind Cord (75 Feet Per Order)
1 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x Part NP36B White Plastic Plug
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Go To Roman And Woven Wood Parts
1 x ANP11A - Vanilla Left Side Lock Body
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x #0.9mm-C-Vanilla Shade Cord(75 Feet Per Order)
1 x #0.9mm-F11-Smokey Gray Shade Cord (75 Feet Per Order)
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NM012A Cord Tilter High Profile
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x #0.9mm-D-Sand Shade Cord(75 Feet Per Order)
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP72D-Off White Right Side End Cap
1 x Part NP02- C Clamp For Cord Loop System
1 x #1.8mm-D-Sand Blind Cord(75 Feet Per Order)
1 x Part NP71 Off White Left Cord Clutch Cover
$540.44
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts