$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NV030A- Valance Corner
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x #1.4mm-B1-Alabaster Blind Cord (75 Feet Per Order)
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NV002D - Wand Control
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NM031C-1" Wand Tilter A
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
1 x Part NV027-#10 Vertical Chain Connector
1 x #1.8mm-H-Oak Blind Cord (75 Feet Per Order)
1 x White Cord Loop B (4 Feet Tall) Click Here For More Information
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NV012B1- Plastic Link
1 x Part NR01 (Qty10)Brown Cord Lock 3 Guides (screws not included)
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM038C - 1' Wand Tilter
1 x #1.4mm-H-Medium Walnut Cord(75 Feet Per Order)
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NV031 -Replacement Stem (Qyt 1 Stem Only)
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x #0.9mm-G-Pink Shade Cord(75 Feet Per Order)
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part NM040J- Valance Clip (Quantity 15)
1 x #0- 0.9mm Cord Size and Safety (click here for more information
1 x Part NV026- #10 Vertical Chain $.99 Per Foot
1 x Part NV002A2 (Qty 5) Carrier With Plastic Scissors Blue Wheels
1 x Part NM015- White Wand Tilter For One Inch blind
1 x #1.4mm-F-Oak Blind Cord(75 Feet Per Order)
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part NV004- (Qty. 50)Vertical Slat Fabric Insert 3 3/8" Wide
1 x Part NV036A Click On Picture For Information (Qty 5 Per Order)
1 x #1.8mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x #1.8mm-K-Black Blind Cord (75 Feet Per Order)
1 x Part NM036- Right Side 1 Inch Tilter
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NV007- Vertical Track Kirsch Carrier(Salvaged Part)
1 x Part NV037 Click On Picture For Information(Qty 5 Per Order)
1 x Part NR02- (Qty 6) Roman Shade Lock- 3 guides(screws not include
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NV034 Luminette End Control Stem and Gear
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NV001A Fabric Weight
1 x #0.9mm-H-Peach Blush Cord(75 Feet Per Order)
1 x #0.9mm-L1-Indigo Blue Cord(75 Feet Per Order)
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x White Cord Loop B(6 Feet Tall) Click Here For More Information
1 x Part NV014B- Clear Plastic Slat Repair Tab
1 x Part NV021a- Vertical Stopper
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part NV003C- Clear Plastic Vertical Slat Fabric Insert
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part NM004A-Hunter Douglas Cord Tilter
1 x Part NV031B-Metal Link For 3dayblind Carrier
1 x Part NV029G-(Qty 4) Valance Clip
1 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
1 x Part NV009A- Vertical End Control
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x #1.4mm-D-Sand Blind Cord (75 Feet Per Order)
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NM005B Cord Tilter Fits Hex Rod
$611.00
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts