$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x Part NV029G-(Qty 4) Valance Clip
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NM013D Wand Tilter
1 x Part NV031 -Replacement Stem (Qyt 1 Stem Only)
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
1 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NV027-#10 Vertical Chain Connector
1 x Part NV028-(Qty 7) Clip Fits 1 1/2" Headrail
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NV003- Small Vertical Track End Control
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part 32A Vertical Track Bracket
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NV004B- Plastic Link For Carrier 3 5/8" Long
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NV021B - Decomatic Black Lock Washer
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NM031C-1" Wand Tilter A
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NM014B- Cord Tilter Fits Triangle Rod
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NV023C-(Qty 2)Vertical Clip And Base
1 x Part NV021a- Vertical Stopper
1 x Part NV036A Click On Picture For Information (Qty 5 Per Order)
1 x Part NM008 - Wand Tilter
1 x Part NV029-(Qty 7) Valance Clip Fits On Top Of A 1 7/8" Headrai
1 x Part NM038E - 1" Wand Tilter
1 x Part NV021- Lock Washer
1 x Part NV030- Valance Corner
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NV029D (Qty 3) Valance Clip
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part 25 Small Installation Backet (screws not included)
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part NV009- Vertical Track Laserlite Barrel For End Control
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NV002A-(Qty 5) Carrier With Plastic Scissors Black Wheels
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NV014A- White Vertical Repair Clip
1 x Part NV026- #10 Vertical Chain $.99 Per Foot
1 x Part 34 Installation Bracket
1 x Part NV016-2.2 mm Track Cord (100 Feet per Order)
1 x Part NV014- Silver Vertical Repair Clip
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NV023- Vertical End Cap
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NV037 Click On Picture For Information(Qty 5 Per Order)
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part 08- Silhouette Installation Bracket (screws not included)
1 x #2.7 mm cord size (click here for more information)
$569.35
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts