$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NP36B White Plastic Plug
1 x #2.7mm-E-Dark Walnut Cord(50 Feet Per Order)
2 x Part NV010- Vertical Track Sprocket (Qty 1)
1 x #0.9mm-A-White Pleated Shade Cord-(75 Feet Per Order)
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part 25 Small Installation Backet (screws not included)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NP07A Wear Bar
1 x Part NM038C - 1' Wand Tilter
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x Part NP72D-Off White Right Side End Cap
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NP37A- Motor Lock
1 x # Threading Tool
2 x #0.9mm-M1-Red Shade Cord(75 Feet Per Order)
1 x Part NR02- (Qty 6) Roman Shade Lock- 3 guides(screws not include
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
2 x Part NV029G-(Qty 4) Valance Clip
1 x Part NV005- Carrier Uses Plastic Link
1 x #1.4mm-H-Medium Walnut Cord(75 Feet Per Order)
1 x Part NM017 Cord Tilter Fits Square Rod
1 x #1.8 mm cord size (click here for more information)
1 x #0.9mm-G-Pink Shade Cord(75 Feet Per Order)
1 x Part NV028-(Qty 7) Clip Fits 1 1/2" Headrail
1 x Part NV038 Vertical Track Carrier (Qty 1 Per Order)
1 x #0- 0.9mm Cord Size and Safety (click here for more information
1 x #1.8mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x Part NV030- Valance Corner
1 x Part NV005B- Vertical End Cap For Hunter Douglas
1 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x #0.9mm-C-Vanilla Shade Cord(75 Feet Per Order)
1 x Part NV017A-Open Bead For 2.2mm Vertical Cord
1 x Part NV016-2.2 mm Track Cord (100 Feet per Order)
1 x #2.7mm-A11- Alabaster Blind Cord (50 Feet Per Order)
1 x #1.4mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x #1.8mm-H-Oak Blind Cord (75 Feet Per Order)
1 x Part NV029A (Qty 3) Valance clip
1 x Part NV002D - Wand Control
1 x #0.9mm-H-Peach Blush Cord(75 Feet Per Order)
1 x Part NV034 Luminette End Control Stem and Gear
1 x #0.9mm-D-Sand Shade Cord(75 Feet Per Order)
1 x #2.7 mm cord size (click here for more information)
1 x #1.2mm-A-White Blind Cord (75 Feet Per Order)
1 x Part NV021B - Decomatic Black Lock Washer
1 x Part NV031 -Replacement Stem (Qyt 1 Stem Only)
1 x Part SVS6 White End Cap(1 pair)
$612.39
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts