$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NM038C - 1' Wand Tilter
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM012A Cord Tilter High Profile
2 x Part NM038E - 1" Wand Tilter
1 x Part NM036- Right Side 1 Inch Tilter
2 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x #0.9mm-F11-Smokey Gray Shade Cord (75 Feet Per Order)
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
2 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
2 x Part NM013C- 2" Wand Tilter
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x #White CordLoop A - 6 Feet Tall -Click Here For More Information
2 x Part NM014A- Wand Tilter For 2" High Profile
2 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NM012C- Discontinued New Version Will Ship Out
2 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part NM004A-Discontinued (new version will ship out)
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part NV002C End Control With Chain
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part NM024- Mini Blind Cord Lock
1 x #0.9mm-Q-Black Shade Cord (75 Feet Per Order)
1 x Part NM008 - Wand Tilter
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NP16A- Plug For Easy Rise Tape
1 x Part NM017 Cord Tilter Fits Square Rod
1 x ANP10A - White Right Side Body Cover
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x ANP11A - Vanilla Left Side Lock Body
1 x #1.8mm-B1-Alabaster Blind Cord(75 Feet Per Order)
$591.36
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts