$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NV004A- Plastic Link For Carrier 3 5/16" Long
1 x Part NV029-(Qty 7) Valance Clip Fits On Top Of A 1 7/8" Headrai
1 x Part NV015- Top Plug For Vertical Fabric
1 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x Part NV027-#10 Vertical Chain Connector
1 x Part NV003- Graber Small Vertical Track End Control
1 x Part NV029F-(Qty 5) Valance Clip 1 1/2" Rail
1 x Part NV009- Vertical Track Laserlite Barrel For End Control
1 x Part 08- Silhouette Installation Bracket (screws not included)
1 x Part 07A- (Qty 1) Pleated Shade Bracket (screws not included)
1 x Part NV030A- Valance Corner
1 x Part NV023C-(Qty 2)Vertical Clip And Base
1 x Part NV002A2 (Qty 5) Carrier With Plastic Scissors Blue Wheels
1 x Part 36 Pleated Shade Bracket (1)
1 x Part NV029H-(Qty 5) Valance Clip
1 x Part NV029J Valance Clips 3 per Order
1 x Part NV007- Vertical Track Kirsch Carrier(Salvaged Part)
1 x Part SVS6 White End Cap(1 pair)
1 x Part NV029D (Qty 3) Valance Clip
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x YNP01EF-Metal Cord Guide
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x ANP11A - Vanilla Left Side Lock Body
1 x #0.9mm-C-Vanilla Shade Cord(75 Feet Per Order)
1 x Part NM012A Cord Tilter High Profile
1 x Part NP36A Clear Plastic Plug
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM040J- Valance Clip (Quantity 15)
1 x #0.9mm-N-Dark Brown Cord (75 Feet Per Order)
1 x #1.4mm-A-White Blind Cord (75 Feet Per Order)
1 x Part NP71A-Left Side Blue Cord Clutch
1 x # Threading Tool
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x #1.8mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x Part NP05A Cord Wedge
1 x Part NM038D - 1" Wand Tilter
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x #0- 0.9mm Cord Size and Safety (click here for more information
1 x #0.9mm-A-White Pleated Shade Cord-(75 Feet Per Order)
1 x #1.8mm-D-Sand Blind Cord(75 Feet Per Order)
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NP07A Wear Bar
1 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NP16B Tape Only (160 feet)
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x #1.8mm-I-Medium Walnut Cord (75 Feet Per Order)
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part NM040G- Valance Clip (Quantity 15)
1 x White Cord Loop B (4 Feet Tall) Click Here For More Information
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x #2.7 mm cord size (click here for more information)
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NP75 White Motor (no returns)
1 x #2.7mm-A-White Blind Cord (50 Feet Per Order)
1 x #1.8mm-B1-Alabaster Blind Cord(75 Feet Per Order)
1 x #0.9mm-L1-Indigo Blue Cord(75 Feet Per Order)
1 x YNP01D-Right Del Mar Green Lock
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x #0.9mm-H-Peach Blush Cord(75 Feet Per Order)
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part NM013D- Compatible Tilter Ships Out
1 x #0.9mm-F11-Smokey Gray Shade Cord (75 Feet Per Order)
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NP36C Off White Plastic Plug
$956.78
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts