$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NP76 Grey Motor (no returns)
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NP71 Off White Left Cord Clutch Cover
1 x #1.4mm-HH-Dark Walnut Cord(75 Feet Per Order)
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NP37A- Motor Lock
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x Part NP72J White Left Cord Clutch Cover
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x #2.7mm-D-Medium Walnut Cord (50 Feet Per Order)
1 x Part NV023- Vertical End Cap
1 x Part NV010- Vertical Track Sprocket (Qty 1)
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NV021B - Decomatic Black Lock Washer
1 x #1.2 mm cord size (click here for more information)
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x Part NV009A- Vertical End Control
1 x # Threading Tool
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NV031 -Replacement Stem (Qyt 1 Stem Only)
1 x #2.2mm*Vertical Track Cord* (50 Feet Per Order)
1 x Part NV012B1- Plastic Link
1 x YNP01D-Right Del Mar Green Lock
1 x #1.4 mm cord size (click here for more information)
1 x #2.7mm-B-Oak Blind Cord (50 Feet Per Order)
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NV014B- Clear Plastic Slat Repair Tab
1 x Part NP23 (Qty 1) Clutch Cover
1 x Part NV002C End Control With Chain
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP72B-Right Side Blue Cord Clutch
1 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x #0- 0.9mm Cord Size and Safety (click here for more information
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NV002 Vertical Track End Control
1 x #1.4mm-B1-Alabaster Blind Cord (75 Feet Per Order)
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x #0.9mm-D-Sand Shade Cord(75 Feet Per Order)
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Go To Roman And Woven Wood Parts
1 x Part NV029A (Qty 3) Valance clip
1 x #0.9mm-F11-Smokey Gray Shade Cord (75 Feet Per Order)
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x YNP01B Left Side Cord lock (White only)
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NV002B Vertical Track End Control Notchless
1 x #0.9mm-H-Peach Blush Cord(75 Feet Per Order)
1 x YNP01A Right Side Cord lock (White Only)
1 x Part NV004A- Plastic Link For Carrier 3 5/16" Long
1 x Part NM043A-Loop Type Wand Tilter
$938.30
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts