$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NV016-2.2 mm Track Cord (100 Feet per Order)
1 x Part NV004- (Qty. 50)Vertical Slat Fabric Insert 3 3/8" Wide
1 x Part NV004B- Plastic Link For Carrier 3 5/8" Long
1 x Part NV015- Top Plug For Vertical Fabric
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP05A Cord Wedge
1 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x Part- NM052 Levolor Mini Blind Cord Lock
2 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NP36B White Plastic Plug
1 x ANP11B - White Left Side Lock Body
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
2 x Part NP23 (Qty 1) Clutch Cover
1 x Part NM003AA- Cord Lock for 2" Blind
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
2 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
2 x YNP01D-Right Del Mar Green Lock
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NP72G-White Left Side End Cap
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part NP36A Clear Plastic Plug
2 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x Part NV029-(Qty 7) Valance Clip Fits On Top Of A 1 7/8" Headrai
1 x Part NP66 Right Side Black Motor (no returns or refunds)
1 x Part NP72H-White Right Side End Cap
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NM014B- Cord Tilter Fits Triangle Rod
2 x YNP01G-(1)Cord Guide
1 x Part NM036- Right Side 1 Inch Tilter
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NM013D Wand Tilter
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NP10A- Cord Guide 1 3/4" Wide
2 x Part NP39A stopper
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NP71 Off White Left Cord Clutch Cover
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NP72B-Right Side Blue Cord Clutch
1 x Part NM031C-1" Wand Tilter A
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NV002A3 (Qty 2) Carrier With Plastic Scissors White Wheels
1 x Part NV031 -Replacement Stem (Qyt 1 Stem Only)
1 x Part NV031B-Metal Link For 3dayblind Carrier
1 x Part NV014A- White Vertical Repair Clip
1 x #2.7mm-D-Medium Walnut Cord (50 Feet Per Order)
1 x #2.7mm-A-White Blind Cord (50 Feet Per Order)
$855.00
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts