$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x White Cord Loop B (4 Feet Tall) Click Here For More Information
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x #2.2mm*Vertical Track Cord* (50 Feet Per Order)
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NR03- (Qty2)Clear Plastic Bar Eyelet
1 x #1.4mm-F-Oak Blind Cord(75 Feet Per Order)
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NP16B Tape Only (160 feet)
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NM003AA- Cord Lock for 2" Blind
1 x #2.7mm-A-White Blind Cord (50 Feet Per Order)
1 x Part 26 Large Installation Bracket (screws not included)
1 x White - Cord Loop B(5 Feet Tall) Click Here For More Information
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x #0.9mm-H-Peach Blush Cord(75 Feet Per Order)
1 x Part NP76 Grey Motor (no returns)
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NM012A Cord Tilter High Profile
1 x #1.4 mm cord size (click here for more information)
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x #1.2 mm cord size (click here for more information)
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NR01 (Qty10)Brown Cord Lock 3 Guides (screws not included)
1 x Part SVS92 White End Cap(1 pair)
1 x #1.4mm-A-White Blind Cord (75 Feet Per Order)
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x #2.7mm-B-Oak Blind Cord (50 Feet Per Order)
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part 32A Vertical Track Bracket
1 x Part 36 Pleated Shade Bracket (1)
1 x #1.8mm-I-Medium Walnut Cord (75 Feet Per Order)
1 x #White CordLoop A - 6 Feet Tall -Click Here For More Information
1 x Part NM031C-1" Wand Tilter A
1 x YNP01A Right Side Cord lock (White Only)
1 x #1.4mm-B1-Alabaster Blind Cord (75 Feet Per Order)
1 x Part NM038C - 1' Wand Tilter
1 x Part NM013D Wand Tilter
1 x White Cord Loop B(6 Feet Tall) Click Here For More Information
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NP65 Right Side Blue Motor (no returns or refunds)
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM038E - 1" Wand Tilter
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part NR09 Cord Guide (screws not included)
1 x #0.9mm-B1-Alabaster Shade Cord(75 Feet Per Order)
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM004A-Hunter Douglas Cord Tilter
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NP23 (Qty 1) Clutch Cover
1 x #1.2mm-A-White Blind Cord (75 Feet Per Order)
1 x Part NP36B White Plastic Plug
1 x Part NP36A Clear Plastic Plug
$775.56
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts