$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x YNP01A Right Side Cord lock (White Only)
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NP36B White Plastic Plug
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x Part NP05A Cord Wedge
1 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x YNP01C Left Side Cord lock (White only)
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x Part NP72I White Right Cord Clutch Cover
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x Part NP36A Clear Plastic Plug
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part NP36C Off White Plastic Plug
1 x Part 32A Vertical Track Bracket
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NP75 White Motor (no returns)
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part NM036- Right Side 1 Inch Tilter
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x # Threading Tool
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x #2.7mm-E-Dark Walnut Cord(50 Feet Per Order)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NR09B #10 Plastic Beaded Chain (100 Feet per Order)
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NM038C - 1' Wand Tilter
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NR01 (Qty10)Brown Cord Lock 3 Guides (screws not included)
1 x Part NM012A Cord Tilter High Profile
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x #2.2mm*Vertical Track Cord* (50 Feet Per Order)
1 x #1.4mm-D-Sand Blind Cord (75 Feet Per Order)
1 x Part NM005A Cord Tilter Fits Hex Rod
$483.03
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts