$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x #1.8mm-B1-Alabaster Blind Cord(75 Feet Per Order)
1 x Part NV001-100 Clips(no returns)
1 x Part NM013C- 2" Wand Tilter
1 x #0.9mm-D-Sand Shade Cord(75 Feet Per Order)
1 x Part NV012B1- Plastic Link
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Go To Roman And Woven Wood Parts
1 x Part NP37A- Motor Lock
1 x #0.9mm-C-Vanilla Shade Cord(75 Feet Per Order)
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NV037 Click On Picture For Information(Qty 5 Per Order)
1 x #2.2mm*Vertical Track Cord* (50 Feet Per Order)
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x #0- 0.9mm Cord Size and Safety (click here for more information
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NV021a- Vertical Stopper
1 x #0.9mm-L1-Indigo Blue Cord(75 Feet Per Order)
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NV017A-Open Bead For 2.2mm Vertical Cord
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NV002A-(Qty 5) Carrier With Plastic Scissors Black Wheels
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NV034 Luminette End Control Stem and Gear
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NP36B White Plastic Plug
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NV029-(Qty 7) Valance Clip Fits On Top Of A 1 7/8" Headrai
1 x ANP11A - Vanilla Left Side Lock Body
1 x Part NM038C - 1' Wand Tilter
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NP66 Right Side Black Motor (no returns or refunds)
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NV026- #10 Vertical Chain $.99 Per Foot
1 x #1.8mm-K-Black Blind Cord (75 Feet Per Order)
1 x Part NV009- Vertical Track Laserlite Barrel For End Control
1 x Part NP02- C Clamp For Cord Loop System
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part NV005B- Vertical End Cap For Hunter Douglas
1 x Part NM003AA- Cord Lock for 2" Blind
1 x #2.7 mm cord size (click here for more information)
1 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x #2.7mm-A3- Sand Blind Cord (50 Feet Per Order)
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM004A-Discontinued (new version will ship out)
1 x Part NV029G-(Qty 4) Valance Clip
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x Part NM024- Mini Blind Cord Lock
1 x ANP10A - White Right Side Body Cover
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NP72F-Vanilla Left Side End Cap
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NV031B-Metal Link For 3dayblind Carrier
1 x Part NV023A-(Qty 3)Decomatic Vertical Carrier
1 x Part NP07A Wear Bar
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NV030- Valance Corner
1 x Part NM004A-Hunter Douglas Cord Tilter
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x YNP01E-Del Mar Vanilla Left Side
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NP72G-White Left Side End Cap
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NV010- Vertical Track Sprocket (Qty 1)
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NM012A Cord Tilter High Profile
1 x YNP01C Left Side Cord lock (White only)
1 x #1.8mm-I-Medium Walnut Cord (75 Feet Per Order)
1 x Part NV002C End Control With Chain
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x #0.9mm-G-Pink Shade Cord(75 Feet Per Order)
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NP36A Clear Plastic Plug
1 x Part NP23 (Qty 1) Clutch Cover
1 x Part NM038E - 1" Wand Tilter
1 x #1.4mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x #1.8mm-H-Oak Blind Cord (75 Feet Per Order)
1 x Part NV028-(Qty 7) Clip Fits 1 1/2" Headrail
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x #0.9mm-B1-Alabaster Shade Cord(75 Feet Per Order)
1 x #2.7mm-E-Dark Walnut Cord(50 Feet Per Order)
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x #1.8mm-J-Dark Walnut Cord (75 Feet Per Order)
1 x Part NV004A- Plastic Link For Carrier 3 5/16" Long
1 x #1.4mm-D-Sand Blind Cord (75 Feet Per Order)
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NP16A- Plug For Easy Rise Tape
1 x Part NV014B- Clear Plastic Slat Repair Tab
1 x Part NV009A- Vertical End Control
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NV027-#10 Vertical Chain Connector
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NV002-Discontinued (A Compatible Control) Will Ship Out
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x #1.8mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
$1,106.10
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts