$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x Part NV002 Vertical Track End Control
1 x Part NV004B- Plastic Link For Carrier 3 5/8" Long
1 x Part NV029G-(Qty 4) Valance Clip
1 x Part NV031 -Replacement Stem (Qyt 1 Stem Only)
1 x Part NV023C-(Qty 2)Vertical Clip And Base
1 x Part NV027-#10 Vertical Chain Connector
1 x Part NV003B- (Qty 10) Graber Small Vertical Track Carrier
1 x Part NV029A (Qty 3) Valance clip
1 x Part NV012B1- Plastic Link
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NM014B- Cord Tilter Fits Triangle Rod
1 x Part NM013D Wand Tilter
1 x Part NM036- Right Side 1 Inch Tilter
1 x Part 32A Vertical Track Bracket
1 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
1 x Part 36 Pleated Shade Bracket (1)
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NV030- Valance Corner
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NM038D - 1" Wand Tilter
1 x Part NV016-2.2 mm Track Cord (100 Feet per Order)
1 x Part 34 Installation Bracket
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NV021B - Decomatic Black Lock Washer
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part NV007- Vertical Track Kirsch Carrier(Salvaged Part)
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NV004A- Plastic Link For Carrier 3 5/16" Long
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NV005- Carrier Uses Plastic Link
1 x Part 07A- (Qty 1) Pleated Shade Bracket (screws not included)
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NV003- Graber Small Vertical Track End Control
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NV002D - Wand Control
1 x Part NV009- Vertical Track Laserlite Barrel For End Control
1 x Part NV002-Discontinued (A Compatible Control) Will Ship Out
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NV001-100 Clips(no returns)
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NV031B-Metal Link For 3dayblind Carrier
1 x Part NV028-(Qty 7) Clip Fits 1 1/2" Headrail
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NV038 Vertical Track Carrier (Qty 1 Per Order)
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NV034 Luminette End Control Stem and Gear
1 x Part NV010- Vertical Track Sprocket (Qty 1)
1 x Part NV029H-(Qty 5) Valance Clip
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NM004A-Hunter Douglas Cord Tilter
1 x Part NM038E - 1" Wand Tilter
1 x Part 08- Silhouette Installation Bracket (screws not included)
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part 07- Installation Bracket (screws not included)
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NV029D (Qty 3) Valance Clip
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part 25 Small Installation Backet (screws not included)
1 x Part NM013C- 2" Wand Tilter
1 x Part NM031C-1" Wand Tilter A
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part 30A Brown Bracket LP (screws not included)
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x #1.8mm-K-Black Blind Cord (75 Feet Per Order)
1 x #0.9mm-F11-Smokey Gray Shade Cord (75 Feet Per Order)
1 x #0- 0.9mm Cord Size and Safety (click here for more information
1 x #2.7mm-B-Oak Blind Cord (50 Feet Per Order)
$1,034.88
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts