$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x #0.9mm-H-Peach Blush Cord(75 Feet Per Order)
1 x Part NV023C-(Qty 2)Vertical Clip And Base
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x #1.4mm-D-Sand Blind Cord (75 Feet Per Order)
1 x Part NV029D (Qty 3) Valance Clip
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NV002C End Control With Chain
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP72B-Right Side Blue Cord Clutch
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NP37A- Motor Lock
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x #1.8mm-J-Dark Walnut Cord (75 Feet Per Order)
1 x #0- 0.9mm Cord Size and Safety (click here for more information
1 x Part NV005B- Vertical End Cap For Hunter Douglas
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x Part NM031C-1" Wand Tilter A
1 x Part NV003C- Clear Plastic Vertical Slat Fabric Insert
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NV036A Click On Picture For Information (Qty 5 Per Order)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM038C - 1' Wand Tilter
1 x Part NV002 Vertical Track End Control
1 x Part NV003B- (Qty 10) Graber Small Vertical Track Carrier
1 x Part NV030- Valance Corner
1 x Part NV029G-(Qty 4) Valance Clip
1 x #1.2mm-A-White Blind Cord (75 Feet Per Order)
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x #1.4mm-A-White Blind Cord (75 Feet Per Order)
1 x Part NV010- Vertical Track Sprocket (Qty 1)
1 x Part NV004B- Plastic Link For Carrier 3 5/8" Long
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x #1.8mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x YNP01E-Del Mar Vanilla Left Side
1 x #1.8mm-D-Sand Blind Cord(75 Feet Per Order)
1 x Part NV014A- White Vertical Repair Clip
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NV002A3 (Qty 2) Carrier With Plastic Scissors White Wheels
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x #0.9mm-Q-Black Shade Cord (75 Feet Per Order)
1 x #0.9mm-C-Vanilla Shade Cord(75 Feet Per Order)
1 x Part NP72I White Right Cord Clutch Cover
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NV001A Fabric Weight
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x Part NP36A Clear Plastic Plug
1 x Part NV009A- Vertical End Control
1 x Part NV038 Vertical Track Carrier (Qty 1 Per Order)
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NP72J White Left Cord Clutch Cover
1 x Part NV015- Top Plug For Vertical Fabric
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP03E-Clear Plastic Stopball (Qty 10)
1 x Part NV002B Vertical Track End Control Notchless
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x #2.7mm-E-Dark Walnut Cord(50 Feet Per Order)
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NV004- (Qty. 50)Vertical Slat Fabric Insert 3 3/8" Wide
1 x Part NM036- Right Side 1 Inch Tilter
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NM038E - 1" Wand Tilter
1 x Part NM004A-Discontinued (new version will ship out)
1 x #0.9mm-D-Sand Shade Cord(75 Feet Per Order)
1 x Part NP39A stopper
1 x Part NV028-(Qty 7) Clip Fits 1 1/2" Headrail
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part NV027-#10 Vertical Chain Connector
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x #1.8mm-K-Black Blind Cord (75 Feet Per Order)
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x YNP01C Left Side Cord lock (White only)
1 x Part NV037 Click On Picture For Information(Qty 5 Per Order)
1 x Part NV004A- Plastic Link For Carrier 3 5/16" Long
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NP72H-White Right Side End Cap
1 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NV002D - Wand Control
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x #2.7mm-B-Oak Blind Cord (50 Feet Per Order)
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NP75 White Motor (no returns)
1 x Part NV029H-(Qty 5) Valance Clip
1 x Part NM008 - Wand Tilter
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NM043A-Loop Type Wand Tilter
1 x #0.9mm-M1-Red Shade Cord(75 Feet Per Order)
1 x Part NP72F-Vanilla Left Side End Cap
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NV001-100 Clips(no returns)
$1,213.14
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts