$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part 32A Vertical Track Bracket
1 x Part 26 Large Installation Bracket (screws not included)
1 x Part 36 Pleated Shade Bracket (1)
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x YNP01E-Del Mar Vanilla Left Side
1 x #0.9mm-Q-Black Shade Cord (75 Feet Per Order)
1 x Part NV029H-(Qty 5) Valance Clip
1 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x Part NP62 cord guide
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part NP66 Right Side Black Motor (no returns or refunds)
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part NV005B- Vertical End Cap For Hunter Douglas
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x White - Cord Loop B(5 Feet Tall) Click Here For More Information
1 x #White CordLoop A - 6 Feet Tall -Click Here For More Information
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x #0.9mm-G-Pink Shade Cord(75 Feet Per Order)
1 x Part NR09C #10 Plastic Connector( Qty. 20 per Order)
1 x Part NV007- Vertical Track Kirsch Carrier(Salvaged Part)
1 x Part NV030A- Valance Corner
1 x Part NV015- Top Plug For Vertical Fabric
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NP36A Clear Plastic Plug
1 x Part NP71A-Left Side Blue Cord Clutch
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NV001-100 Clips(no returns)
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NV002A3 (Qty 2) Carrier With Plastic Scissors White Wheels
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x YNP01EF-Metal Cord Guide
1 x Part NR03- (Qty2)Clear Plastic Bar Eyelet
1 x Part NP72J White Left Cord Clutch Cover
1 x ANP11B - White Left Side Lock Body
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x #0.9mm-M1-Red Shade Cord(75 Feet Per Order)
1 x Part NM043A-Loop Type Wand Tilter
1 x YNP01D-Right Del Mar Green Lock
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NP72B-Right Side Blue Cord Clutch
1 x #1.4mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x Part NV014- Silver Vertical Repair Clip
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NP72G-White Left Side End Cap
1 x Part NV029A (Qty 3) Valance clip
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NV023C-(Qty 2)Vertical Clip And Base
1 x Part NV002D - Wand Control
1 x # Threading Tool
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x #1.4mm-B1-Alabaster Blind Cord (75 Feet Per Order)
1 x Part NP72D-Off White Right Side End Cap
1 x Part NV029-(Qty 7) Valance Clip Fits On Top Of A 1 7/8" Headrai
1 x #2.7mm-B-Oak Blind Cord (50 Feet Per Order)
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NV002A2 (Qty 5) Carrier With Plastic Scissors Blue Wheels
1 x Part NR02- (Qty 6) Roman Shade Lock- 3 guides(screws not include
1 x Part NV029J Valance Clips 3 per Order
1 x #2.7mm-A3- Sand Blind Cord (50 Feet Per Order)
1 x Part NV034 Luminette End Control Stem and Gear
1 x Part NM038D - 1" Wand Tilter
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NR09 Cord Guide (screws not included)
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NP36C Off White Plastic Plug
1 x Part NR01 (Qty10)Brown Cord Lock 3 Guides (screws not included)
1 x Part NP72H-White Right Side End Cap
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NV031B-Metal Link For 3dayblind Carrier
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NP23 (Qty 1) Clutch Cover
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NP07A Wear Bar
1 x Part NV014A- White Vertical Repair Clip
1 x #0.9mm-N-Dark Brown Cord (75 Feet Per Order)
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x YNP01G-(1)Cord Guide
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NP39- Tan Motor For Cordless Blind(no returns)
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NP75 White Motor (no returns)
1 x #2.7 mm cord size (click here for more information)
1 x Part NV003C- Clear Plastic Vertical Slat Fabric Insert
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NV003- Graber Small Vertical Track End Control
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NM024- Mini Blind Cord Lock
1 x #0.9mm-C-Vanilla Shade Cord(75 Feet Per Order)
1 x Part NV036A Click On Picture For Information (Qty 5 Per Order)
1 x #0.9mm-H-Peach Blush Cord(75 Feet Per Order)
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NV004- (Qty. 50)Vertical Slat Fabric Insert 3 3/8" Wide
1 x Part NV012B1- Plastic Link
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NV027-#10 Vertical Chain Connector
1 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
1 x Part NP76 Grey Motor (no returns)
1 x Part NP72F-Vanilla Left Side End Cap
1 x Part NV004A- Plastic Link For Carrier 3 5/16" Long
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x #1.4 mm cord size (click here for more information)
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x #1.8mm-I-Medium Walnut Cord (75 Feet Per Order)
1 x Part NM008 - Wand Tilter
1 x Part NV030- Valance Corner
1 x #2.7mm-A11- Alabaster Blind Cord (50 Feet Per Order)
1 x Part NV031 -Replacement Stem (Qyt 1 Stem Only)
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NV002A-(Qty 5) Carrier With Plastic Scissors Black Wheels
1 x Part NM004A-Discontinued (new version will ship out)
$1,385.50
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts