$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
3 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
2 x Part NM003 -Wand Tilter For 2 Inch Blind
3 x Part NM013C- 2" Wand Tilter
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part NM040G- Valance Clip (Quantity 15)
3 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM012A Cord Tilter High Profile
2 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NM005-Cord Tilter Fits Hex Rod
2 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
2 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM005A Cord Tilter Fits Hex Rod
2 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
2 x Part NM031D- 1" Wand Tiler With Clutch
2 x Part NM042- White Wand Tilter 2" With Hook
2 x Part NM040J- Valance Clip (Quantity 15)
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part- NM087 Mini Blind Bottom Rail Plug
2 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part NM004C-Cord Tilter Fits Hex Rod
2 x Part NM017 Cord Tilter Fits Square Rod
1 x Part NM036- Right Side 1 Inch Tilter
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NM008 - Wand Tilter
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NM038D - 1" Wand Tilter
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NP72G-White Left Side End Cap
1 x #2.2mm*Vertical Track Cord* (50 Feet Per Order)
1 x YNP01A Right Side Cord lock (White Only)
1 x #2.7mm-E-Dark Walnut Cord(50 Feet Per Order)
1 x #1.4mm-F-Oak Blind Cord(75 Feet Per Order)
1 x #1.4 mm cord size (click here for more information)
2 x Part NP36B White Plastic Plug
1 x Part NP02- C Clamp For Cord Loop System
2 x YNP01G-(1)Cord Guide
1 x Part NP16B Tape Only (160 feet)
1 x Part NP62 cord guide
2 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x #1.8 mm cord size (click here for more information)
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part NP66 Right Side Black Motor (no returns or refunds)
1 x #0.9mm-Q-Black Shade Cord (75 Feet Per Order)
1 x #2.7mm-A3- Sand Blind Cord (50 Feet Per Order)
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
2 x Part NP37A- Motor Lock
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x YNP01C Left Side Cord lock (White only)
1 x Part NP36C Off White Plastic Plug
1 x Part NP71 Off White Left Cord Clutch Cover
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x White Cord Loop B(6 Feet Tall) Click Here For More Information
2 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x #2.7mm-A11- Alabaster Blind Cord (50 Feet Per Order)
1 x ANP11A - Vanilla Left Side Lock Body
1 x #0.9mm-G-Pink Shade Cord(75 Feet Per Order)
1 x #1.2 mm cord size (click here for more information)
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
2 x Part NP36A Clear Plastic Plug
1 x Part NP72H-White Right Side End Cap
2 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x YNP01EF-Metal Cord Guide
1 x Part NP05A Cord Wedge
1 x YNP01E-Del Mar Vanilla Left Side
1 x Part NP76 Grey Motor (no returns)
$1,142.55
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts