$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NR09B #10 Plastic Beaded Chain (100 Feet per Order)
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x #0.9mm-M1-Red Shade Cord(75 Feet Per Order)
1 x #1.4mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x #1.2 mm cord size (click here for more information)
1 x #1.4mm-D-Sand Blind Cord (75 Feet Per Order)
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x #1.4mm-F-Oak Blind Cord(75 Feet Per Order)
1 x #0.9mm-F11-Smokey Gray Shade Cord (75 Feet Per Order)
1 x #0.9mm-A-White Pleated Shade Cord-(75 Feet Per Order)
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x #2.7mm-E-Dark Walnut Cord(50 Feet Per Order)
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x #1.8mm-B1-Alabaster Blind Cord(75 Feet Per Order)
1 x Part NM031C-1" Wand Tilter A
1 x #2.7 mm cord size (click here for more information)
1 x #0.9mm-Q-Black Shade Cord (75 Feet Per Order)
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x #1.8mm-K-Black Blind Cord (75 Feet Per Order)
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x #0.9mm-N-Dark Brown Cord (75 Feet Per Order)
1 x Part NM043A-Loop Type Wand Tilter
1 x White Cord Loop B(6 Feet Tall) Click Here For More Information
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x #2.7mm-D-Medium Walnut Cord (50 Feet Per Order)
1 x #2.7mm-A-White Blind Cord (50 Feet Per Order)
1 x #1.8mm-J-Dark Walnut Cord (75 Feet Per Order)
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x #0.9mm-B1-Alabaster Shade Cord(75 Feet Per Order)
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM013D Wand Tilter
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x #0.9mm-L1-Indigo Blue Cord(75 Feet Per Order)
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x #1.4 mm cord size (click here for more information)
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NM017 Cord Tilter Fits Square Rod
1 x #1.4mm-A-White Blind Cord (75 Feet Per Order)
1 x #0- 0.9mm Cord Size and Safety (click here for more information
1 x Part NM040J- Valance Clip (Quantity 15)
1 x #1.8mm-I-Medium Walnut Cord (75 Feet Per Order)
1 x #1.4mm-B1-Alabaster Blind Cord (75 Feet Per Order)
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NM013D- Compatible Tilter Ships Out
1 x #2.7mm-A11- Alabaster Blind Cord (50 Feet Per Order)
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x #0.9mm-G-Pink Shade Cord(75 Feet Per Order)
1 x #1.4mm-H-Medium Walnut Cord(75 Feet Per Order)
1 x #1.8mm-A-White Blind Cord (75 Feet Per Order)
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x #1.8 mm cord size (click here for more information)
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NM011- Wand Tilter For 1" Blind
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x #0.9mm-C-Vanilla Shade Cord(75 Feet Per Order)
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM012A Cord Tilter High Profile
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x #2.2mm*Vertical Track Cord* (50 Feet Per Order)
1 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x #2.7mm-B-Oak Blind Cord (50 Feet Per Order)
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
$661.10
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts