$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NV012B1- Plastic Link
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NV007- Vertical Track Kirsch Carrier(Salvaged Part)
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NM031C-1" Wand Tilter A
1 x Part NV023A-(Qty 3)Decomatic Vertical Carrier
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NV031B-Metal Link For 3dayblind Carrier
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NV023C-(Qty 2)Vertical Clip And Base
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x Part NV002B Vertical Track End Control Notchless
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x Part NV029-(Qty 7) Valance Clip Fits On Top Of A 1 7/8" Headrai
1 x Part NV001-100 Clips(no returns)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NV001A Fabric Weight
1 x Part NV038 Vertical Track Carrier (Qty 1 Per Order)
1 x Part NV002A3 (Qty 2) Carrier With Plastic Scissors White Wheels
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NV005- Carrier Uses Plastic Link
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NV002A-(Qty 5) Carrier With Plastic Scissors Black Wheels
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NV029D (Qty 3) Valance Clip
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NV004A- Plastic Link For Carrier 3 5/16" Long
1 x Part NM012A Cord Tilter High Profile
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part NV034 Luminette End Control Stem and Gear
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NV027-#10 Vertical Chain Connector
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part SVS92 White End Cap(1 pair)
1 x #1.8mm-H-Oak Blind Cord (75 Feet Per Order)
1 x ANP11A - Vanilla Left Side Lock Body
1 x Part NP72I White Right Cord Clutch Cover
1 x Part NP75 White Motor (no returns)
1 x #1.2mm-A-White Blind Cord (75 Feet Per Order)
1 x #1.8mm-A-White Blind Cord (75 Feet Per Order)
1 x Part NP72D-Off White Right Side End Cap
1 x Part NP72G-White Left Side End Cap
1 x Part NP72H-White Right Side End Cap
1 x #1.8mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x Part NR08 Plastic Sew On Ring 5/8"
1 x Part NP05A Cord Wedge
1 x Part NR09B #10 Plastic Beaded Chain (100 Feet per Order)
1 x Part NP16A- Plug For Easy Rise Tape
1 x Part NP62 cord guide
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part NR01 (Qty10)Brown Cord Lock 3 Guides (screws not included)
1 x YNP01C Left Side Cord lock (White only)
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NP76 Grey Motor (no returns)
$774.44
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts