$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NM008 - Wand Tilter
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x #2.7mm-B-Oak Blind Cord (50 Feet Per Order)
1 x ANP11A - Vanilla Left Side Lock Body
1 x #0.9mm-D-Sand Shade Cord(75 Feet Per Order)
1 x Part NP39- Tan Motor For Cordless Blind(no returns)
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x Part NP62 cord guide
1 x ANP10A - White Right Side Body Cover
1 x Part NP72H-White Right Side End Cap
1 x Part NP72J White Left Cord Clutch Cover
1 x #0.9mm-F11-Smokey Gray Shade Cord (75 Feet Per Order)
1 x #1.2 mm cord size (click here for more information)
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x Part NP36A Clear Plastic Plug
1 x Part NP65 Right Side Blue Motor (no returns or refunds)
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part NP16A- Plug For Easy Rise Tape
1 x #1.8mm-D-Sand Blind Cord(75 Feet Per Order)
1 x Part NP37A- Motor Lock
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x #0- 0.9mm Cord Size and Safety (click here for more information
1 x YNP01E-Del Mar Vanilla Left Side
1 x YNP01B Left Side Cord lock (White only)
1 x Part NP02- C Clamp For Cord Loop System
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x #1.8mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x #1.4mm-A-White Blind Cord (75 Feet Per Order)
1 x #1.8mm-K-Black Blind Cord (75 Feet Per Order)
1 x #2.7mm-A11- Alabaster Blind Cord (50 Feet Per Order)
1 x ANP11B - White Left Side Lock Body
1 x #2.2mm*Vertical Track Cord* (50 Feet Per Order)
$582.15
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts