$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NM013D- Compatible Tilter Ships Out
1 x #2.7mm-D-Medium Walnut Cord (50 Feet Per Order)
1 x YNP01EF-Metal Cord Guide
1 x #1.4mm-H-Medium Walnut Cord(75 Feet Per Order)
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x White Cord Loop B(6 Feet Tall) Click Here For More Information
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x YNP01D-Right Del Mar Green Lock
1 x #0.9mm-N-Dark Brown Cord (75 Feet Per Order)
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x #1.4mm-HH-Dark Walnut Cord(75 Feet Per Order)
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NM013C- 2" Wand Tilter
1 x #1.4mm-D-Sand Blind Cord (75 Feet Per Order)
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x #1.8mm-J-Dark Walnut Cord (75 Feet Per Order)
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
1 x Part NP71 Off White Left Cord Clutch Cover
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x Part NP23 (Qty 1) Clutch Cover
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x YNP01C Left Side Cord lock (White only)
1 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x #0.9mm-B1-Alabaster Shade Cord(75 Feet Per Order)
1 x Part NP16B Tape Only (160 feet)
1 x Part NP72B-Right Side Blue Cord Clutch
1 x Part NM038C - 1' Wand Tilter
1 x Part NP72J White Left Cord Clutch Cover
1 x #2.7mm-A11- Alabaster Blind Cord (50 Feet Per Order)
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x #2.7mm-A3- Sand Blind Cord (50 Feet Per Order)
1 x Part NP71A-Left Side Blue Cord Clutch
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x #White CordLoop A - 6 Feet Tall -Click Here For More Information
1 x #1.4mm-A-White Blind Cord (75 Feet Per Order)
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part NM043A-Loop Type Wand Tilter
1 x YNP01B Left Side Cord lock (White only)
1 x Part NM024- Mini Blind Cord Lock
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x #0.9mm-L1-Indigo Blue Cord(75 Feet Per Order)
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x #1.2 mm cord size (click here for more information)
1 x Part NM041J Valance Clip 3.5" (Quantity 15)
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NP72D-Off White Right Side End Cap
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x #1.4mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x Part NM031C-1" Wand Tilter A
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x #2.2mm*Vertical Track Cord* (50 Feet Per Order)
1 x #2.7mm-E-Dark Walnut Cord(50 Feet Per Order)
1 x YNP01E-Del Mar Vanilla Left Side
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part- NM057-Barrel For Hex Rod (Quantity 4)
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NP76 Grey Motor (no returns)
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x #2.7 mm cord size (click here for more information)
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x Part NM040G- Valance Clip (Quantity 15)
1 x #0.9mm-Q-Black Shade Cord (75 Feet Per Order)
1 x Part NP36A Clear Plastic Plug
1 x ANP11B - White Left Side Lock Body
1 x #0- 0.9mm Cord Size and Safety (click here for more information
1 x Part NP65 Right Side Blue Motor (no returns or refunds)
1 x #1.8mm-H-Oak Blind Cord (75 Feet Per Order)
1 x Part NP72G-White Left Side End Cap
1 x #2.7mm-A-White Blind Cord (50 Feet Per Order)
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NP36B White Plastic Plug
1 x #0.9mm-F11-Smokey Gray Shade Cord (75 Feet Per Order)
1 x Part NM015- White Wand Tilter For One Inch blind
1 x #1.4mm-F-Oak Blind Cord(75 Feet Per Order)
1 x Part NP16A- Plug For Easy Rise Tape
1 x Part NM005B Cord Tilter Fits Hex Rod
1 x #0.9mm-M1-Red Shade Cord(75 Feet Per Order)
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Go To Roman And Woven Wood Parts
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x ANP10A - White Right Side Body Cover
1 x White - Cord Loop B(5 Feet Tall) Click Here For More Information
1 x Part NM008 - Wand Tilter
1 x Part NP75 White Motor (no returns)
1 x #1.8mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NP07A Wear Bar
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
$1,341.22
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts