$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x ANP10A - White Right Side Body Cover
1 x Part NP72B-Right Side Blue Cord Clutch
1 x ANP11B - White Left Side Lock Body
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part 07A- (Qty 1) Pleated Shade Bracket (screws not included)
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NM014B- Cord Tilter Fits Triangle Rod
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part NM004C-Cord Tilter Fits Hex Rod
1 x YNP01D-Right Del Mar Green Lock
1 x Part NM013C- 2" Wand Tilter
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NP36A Clear Plastic Plug
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x Part 07- Installation Bracket (screws not included)
1 x Part NP71 Off White Left Cord Clutch Cover
1 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NP75 White Motor (no returns)
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NR03- (Qty2)Clear Plastic Bar Eyelet
1 x Part 33A Vertical Track Bracket
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x Part NM024- Mini Blind Cord Lock
1 x Part 26 Large Installation Bracket (screws not included)
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part NP65 Right Side Blue Motor (no returns or refunds)
1 x Part NP71A-Left Side Blue Cord Clutch
1 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NP72J White Left Cord Clutch Cover
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NR09A Small Cord Guide (screws not included)
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NM017 Cord Tilter Fits Square Rod
1 x YNP01G-(1)Cord Guide
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x Part NM011- Wand Tilter For 1" Blind
1 x Part NP72F-Vanilla Left Side End Cap
1 x Part NP62 cord guide
1 x Part NP07A Wear Bar
1 x Part NP76 Grey Motor (no returns)
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NM038D - 1" Wand Tilter
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x #1.8mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x Part NV002B Vertical Track End Control Notchless
1 x Part NV002A2 (Qty 5) Carrier With Plastic Scissors Blue Wheels
1 x Part NV004- (Qty. 50)Vertical Slat Fabric Insert 3 3/8" Wide
1 x Part NV017A-Open Bead For 2.2mm Vertical Cord
1 x #0.9mm-N-Dark Brown Cord (75 Feet Per Order)
1 x Part NV004B- Plastic Link For Carrier 3 5/8" Long
1 x #V013A (Qty 25) Cord Holder (screws not included)
$958.68
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts