$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NM013D Wand Tilter
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x Part NM011- Wand Tilter For 1" Blind
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NM036- Right Side 1 Inch Tilter
1 x Part 07A- (Qty 1) Pleated Shade Bracket (screws not included)
1 x Part NV026- #10 Vertical Chain $.99 Per Foot
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part 26 Large Installation Bracket (screws not included)
1 x Part NR09 Cord Guide (screws not included)
1 x Part 36 Pleated Shade Bracket (1)
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NR01 (Qty10)Brown Cord Lock 3 Guides (screws not included)
1 x Part 30A Brown Bracket LP (screws not included)
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NR09B #10 Plastic Beaded Chain (100 Feet per Order)
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part SVS92 White End Cap(1 pair)
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part 07- Installation Bracket (screws not included)
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NM008 - Wand Tilter
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part 25 Small Installation Backet (screws not included)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NR03- (Qty2)Clear Plastic Bar Eyelet
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NM043A-Loop Type Wand Tilter
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NM012A Cord Tilter High Profile
1 x Part NR09A Small Cord Guide (screws not included)
1 x Part NM013C- 2" Wand Tilter
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x Part NP36C Off White Plastic Plug
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x #1.4mm-A-White Blind Cord (75 Feet Per Order)
1 x #2.2mm*Vertical Track Cord* (50 Feet Per Order)
1 x ANP10A - White Right Side Body Cover
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NP39A stopper
1 x Part NP37A- Motor Lock
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part NV009A- Vertical End Control
1 x Part NV004A- Plastic Link For Carrier 3 5/16" Long
1 x Part NP10A- Cord Guide 1 3/4" Wide
$647.33
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts