$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NV009- Vertical Track Laserlite Barrel For End Control
1 x Part NV027-#10 Vertical Chain Connector
1 x Part NV037 Click On Picture For Information(Qty 5 Per Order)
1 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
1 x Part NV004B- Plastic Link For Carrier 3 5/8" Long
1 x Part NV030- Valance Corner
1 x Part NV014B- Clear Plastic Slat Repair Tab
1 x Part NV026- #10 Vertical Chain $.99 Per Foot
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
1 x Part NV031 -Replacement Stem (Qyt 1 Stem Only)
1 x Part NV003B- (Qty 10)Small Vertical Track Carrier
1 x Part NV023A-(Qty 3)Decomatic Vertical Carrier
1 x Part NV002A3 (Qty 2) Carrier With Plastic Scissors White Wheels
1 x Part NV014- Silver Vertical Repair Clip
1 x Part NV038 Vertical Track Carrier (Qty 1 Per Order)
1 x Part NV007- Vertical Track Kirsch Carrier(Salvaged Part)
1 x Part NV001-100 Clips(no returns)
1 x Part NV021- Lock Washer
1 x Part NV029D (Qty 3) Valance Clip
1 x Part NV003- Small Vertical Track End Control
1 x Part NV002 Vertical Track End Control
1 x Part NV002D - Wand Control
1 x Part NV029J Valance Clips 3 per Order
1 x Part NV021a- Vertical Stopper
1 x Part NV012B1- Plastic Link
1 x Part NV001A Fabric Weight
1 x #1.8mm-H-Oak Blind Cord (75 Feet Per Order)
1 x YNP01EF-Metal Cord Guide
1 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x #1.8mm-A-White Blind Cord (75 Feet Per Order)
1 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x #0- 0.9mm Cord Size and Safety (click here for more information
1 x #White CordLoop A - 6 Feet Tall -Click Here For More Information
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NP23 (Qty 1) Clutch Cover
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x Part NP02- C Clamp For Cord Loop System
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part NP62 cord guide
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x #2.7mm-D-Medium Walnut Cord (50 Feet Per Order)
1 x Part NP72H-White Right Side End Cap
1 x #2.7 mm cord size (click here for more information)
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x #0.9mm-M1-Red Shade Cord(75 Feet Per Order)
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x Part NP72I White Right Cord Clutch Cover
1 x Part NP39A stopper
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NP72D-Off White Right Side End Cap
1 x # Threading Tool
1 x Part NP07A Wear Bar
1 x White Cord Loop B(6 Feet Tall) Click Here For More Information
1 x #1.4mm-H-Medium Walnut Cord(75 Feet Per Order)
1 x #1.8 mm cord size (click here for more information)
1 x Go To Roman And Woven Wood Parts
1 x Part NP16A- Plug For Easy Rise Tape
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x YNP01D-Right Del Mar Green Lock
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NP75 White Motor (no returns)
1 x #2.7mm-A11- Alabaster Blind Cord (50 Feet Per Order)
1 x #0.9mm-L1-Indigo Blue Cord(75 Feet Per Order)
1 x Part NP05A Cord Wedge
1 x #1.8mm-I-Medium Walnut Cord (75 Feet Per Order)
1 x #1.8mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x #0.9mm-G-Pink Shade Cord(75 Feet Per Order)
1 x #0.9mm-Q-Black Shade Cord (75 Feet Per Order)
1 x Part NP72F-Vanilla Left Side End Cap
1 x Part NP71A-Left Side Blue Cord Clutch
1 x #2.7mm-A3- Sand Blind Cord (50 Feet Per Order)
1 x YNP01B Left Side Cord lock (White only)
1 x #2.7mm-B-Oak Blind Cord (50 Feet Per Order)
1 x #1.4mm-D-Sand Blind Cord (75 Feet Per Order)
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x YNP01A Right Side Cord lock (White Only)
1 x YNP01C Left Side Cord lock (White only)
1 x YNP01G-(1)Cord Guide
$865.01
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts