$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NR02- (Qty 6) Roman Shade Lock- 3 guides(screws not include
1 x Part NR09A Small Cord Guide (screws not included)
3 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part NR09C #10 Plastic Connector( Qty. 20 per Order)
1 x Part NR09 Cord Guide (screws not included)
1 x Part NR08 Plastic Sew On Ring 5/8"
2 x Part NM038C - 1' Wand Tilter
2 x Part NM040J- Valance Clip (Quantity 15)
3 x Part- NM087 Mini Blind Bottom Rail Plug
2 x Part NM031C-1" Wand Tilter A
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
2 x Part NM038E - 1" Wand Tilter
2 x Part NM003AA- Cord Lock for 2" Blind
2 x Part NM012C- Discontinued New Version Will Ship Out
1 x Part- NM052 Levolor Mini Blind Cord Lock
2 x Part NM005B Cord Tilter Fits Hex Rod
2 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
2 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
2 x Part NM012- 2" Wand Tilter For Low Profile
2 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
2 x Part NM011A-Hook And Sleeve (Quantity 5)
2 x Part NM038D - 1" Wand Tilter
2 x Part NM015- White Wand Tilter For One Inch blind
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
2 x Part NM013D- Compatible Tilter Ships Out
2 x Part NM039-Barrel and Cradle For 1" Blind
2 x Part NM040G- Valance Clip (Quantity 15)
2 x Part NM017 Cord Tilter Fits Square Rod
2 x Part NM031D- 1" Wand Tiler With Clutch
2 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
2 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
2 x Part NM043B-(Compatible Tilter Will Ship Out) Select Blinds Tilt
2 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
2 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
2 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
2 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
2 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
2 x Part NM014B- Cord Tilter Fits Triangle Rod
2 x Part NM041E Clip For 2 1/2" Valance (Quantity 15)
2 x Part NM004C-Cord Tilter Fits Hex Rod
2 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
2 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
2 x Part NM006B- Wand Tilter For Levolor Blind
2 x Part NM035- 1 Inch Wand Tilter Left Side
2 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
2 x Part NM034- 1" Tilter Fit Hex Rod With Groove
2 x Part NM005D Cord Tilter For 2" Blind
2 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
2 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NM046- Craddle For Low Profile (Quantity 10)
2 x Part NM011- Wand Tilter For 1" Blind
1 x #2.7 mm cord size (click here for more information)
2 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
2 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
2 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x #0- 0.9mm Cord Size and Safety (click here for more information
2 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM027B- 2" Tilter Fits Square Rod-Metal Stem
2 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
2 x Part NM041G Valance Clip 2" Tall (Quantity 15)
2 x Part NM024- Mini Blind Cord Lock
1 x Part NM008 - Wand Tilter
2 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x #1.2 mm cord size (click here for more information)
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
2 x Part- NM057-Barrel For Hex Rod (Quantity 4)
2 x Part NM040H- Valance Clip (Quantity 15)
2 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
2 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
2 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
2 x Part NM043A-Loop Type Wand Tilter
2 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
2 x Part NM013C- 2" Wand Tilter
2 x Part NM005-Cord Tilter Fits Hex Rod
1 x #1.4 mm cord size (click here for more information)
2 x Part NM013D Wand Tilter
2 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NM012A Cord Tilter High Profile
2 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NM003 -Wand Tilter For 2 Inch Blind
2 x Part NM032A Replacement Hook 1" Tall (Quantity10)
2 x Part NM043-Black Wand Tilter 2" With Hook
2 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
2 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
2 x Part NM041J Valance Clip 3.5" (Quantity 15)
2 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
2 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
2 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x #1.8 mm cord size (click here for more information)
2 x Part NM037 Cord Tilter For 1" Blind
2 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
2 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
2 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
2 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
2 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
2 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
2 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
2 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
$1,589.37
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts