$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x #1.8mm-H-Oak Blind Cord (75 Feet Per Order)
1 x #2.7mm-B-Oak Blind Cord (50 Feet Per Order)
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part NP36A Clear Plastic Plug
1 x #2.7mm-E-Dark Walnut Cord(50 Feet Per Order)
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x #0.9mm-A-White Pleated Shade Cord-(75 Feet Per Order)
1 x #1.8mm-K-Black Blind Cord (75 Feet Per Order)
1 x Part NP39A stopper
1 x Part NP65 Right Side Blue Motor (no returns or refunds)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x #0.9mm-C-Vanilla Shade Cord(75 Feet Per Order)
1 x Part NM027- 2" Wand Tilter Fits Square Rod High Profile
1 x #1.4mm-A-White Blind Cord (75 Feet Per Order)
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x #1.4mm-B1-Alabaster Blind Cord (75 Feet Per Order)
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NP76 Grey Motor (no returns)
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part NP72J White Left Cord Clutch Cover
1 x Part NM038C - 1' Wand Tilter
1 x Part NM024- Mini Blind Cord Lock
1 x #1.8mm-B1-Alabaster Blind Cord(75 Feet Per Order)
1 x #1.4mm-F-Oak Blind Cord(75 Feet Per Order)
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x #0.9mm-B1-Alabaster Shade Cord(75 Feet Per Order)
1 x Part NM003B 2" Wand Tilter Zinc Loop
1 x Part NP72B-Right Side Blue Cord Clutch
1 x Part- NM009C Dark Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM017 Cord Tilter Fits Square Rod
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NP07A Wear Bar
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x YNP01EF-Metal Cord Guide
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part NP72G-White Left Side End Cap
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NM034- 1" Tilter Fit Hex Rod With Groove
1 x White Cord Loop B(6 Feet Tall) Click Here For More Information
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x YNP01A Right Side Cord lock (White Only)
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x #0.9mm-F11-Smokey Gray Shade Cord (75 Feet Per Order)
1 x #2.7mm-A11- Alabaster Blind Cord (50 Feet Per Order)
1 x Part NP02- C Clamp For Cord Loop System
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x #1.4mm-HH-Dark Walnut Cord(75 Feet Per Order)
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x #0.9mm-Q-Black Shade Cord (75 Feet Per Order)
1 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part NM008 - Wand Tilter
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NM003 -Wand Tilter For 2 Inch Blind
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NM011- Wand Tilter For 1" Blind
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x #1.4mm-H-Medium Walnut Cord(75 Feet Per Order)
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x Part NP05A Cord Wedge
1 x #1.4mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x YNP01C Left Side Cord lock (White only)
1 x #1.4mm-D-Sand Blind Cord (75 Feet Per Order)
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x #0.9mm-M1-Red Shade Cord(75 Feet Per Order)
1 x #0.9mm-G-Pink Shade Cord(75 Feet Per Order)
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x # Threading Tool
1 x #1.8mm-I-Medium Walnut Cord (75 Feet Per Order)
1 x Part NP75 White Motor (no returns)
1 x #1.4 mm cord size (click here for more information)
1 x Part- NM052 Levolor Mini Blind Cord Lock
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NM036- Right Side 1 Inch Tilter
1 x #1.8mm-D-Sand Blind Cord(75 Feet Per Order)
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x #2.7mm-A-White Blind Cord (50 Feet Per Order)
1 x #0- 0.9mm Cord Size and Safety (click here for more information
1 x Part NM042- White Wand Tilter 2" With Hook
1 x #0.9mm-H-Peach Blush Cord(75 Feet Per Order)
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x White Cord Loop B (4 Feet Tall) Click Here For More Information
1 x #1.2mm-A-White Blind Cord (75 Feet Per Order)
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
$898.55
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts