$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NP05A Cord Wedge
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NP16B Tape Only (160 feet)
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NV015- Top Plug For Vertical Fabric
1 x Part NV004B- Plastic Link For Carrier 3 5/8" Long
1 x Part NV030- Valance Corner
1 x Part NV034 Luminette End Control Stem and Gear
1 x Part NP37A- Motor Lock
1 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x Part NV029D (Qty 3) Valance Clip
1 x Part NV038 Vertical Track Carrier (Qty 1 Per Order)
1 x Part NP76 Grey Motor (no returns)
1 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
1 x Part NV005- Carrier Uses Plastic Link
1 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x YNP01B Left Side Cord lock (White only)
1 x Part NV009A- Vertical End Control
1 x Part NP66 Right Side Black Motor (no returns or refunds)
1 x Part NV007- Vertical Track Kirsch Carrier(Salvaged Part)
1 x Part NP07A Wear Bar
1 x Part NP36A Clear Plastic Plug
1 x Part NV036A Click On Picture For Information (Qty 5 Per Order)
1 x Part NV014- Silver Vertical Repair Clip
1 x Part NP72H-White Right Side End Cap
1 x Part NV028-(Qty 7) Clip Fits 1 1/2" Headrail
1 x Part NV021a- Vertical Stopper
1 x Part NV012B1- Plastic Link
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x Part NP08a -New style guide(you must drill out grommet to fit)
1 x Part NP72J White Left Cord Clutch Cover
1 x Part NV002-Discontinued (A Compatible Control) Will Ship Out
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
1 x Part NV014B- Clear Plastic Slat Repair Tab
1 x Part NP72I White Right Cord Clutch Cover
1 x Part NV002A-(Qty 5) Carrier With Plastic Scissors Black Wheels
1 x Part NP16A- Plug For Easy Rise Tape
1 x Part NV017A-Open Bead For 2.2mm Vertical Cord
1 x Part NP23 (Qty 1) Clutch Cover
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NP39- Tan Motor For Cordless Blind(no returns)
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x Part NV029A (Qty 3) Valance clip
1 x Part NV003B- (Qty 10)Small Vertical Track Carrier
1 x Part NP72D-Off White Right Side End Cap
1 x ANP11B - White Left Side Lock Body
1 x ANP10A - White Right Side Body Cover
1 x Part NV004A- Plastic Link For Carrier 3 5/16" Long
1 x Part NV023C-(Qty 2)Vertical Clip And Base
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NV023A-(Qty 3)Decomatic Vertical Carrier
1 x YNP01G-(1)Cord Guide
1 x Part NM006-Not Available(A Compatible Tilter) will ship out
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM013B-2" Wand Tilt Fits Hex Rod(new version will ship out)
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part 33A Vertical Track Bracket
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
1 x Part NM013D- Compatible Tilter Ships Out
1 x #2.2mm*Vertical Track Cord* (50 Feet Per Order)
1 x Part 08- Silhouette Installation Bracket (screws not included)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM041D Clip For 3 1/4" Valance (Quantity 15)
1 x #1.8mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x #1.8mm-B1-Alabaster Blind Cord(75 Feet Per Order)
1 x #1.4mm-D-Sand Blind Cord (75 Feet Per Order)
1 x #0.9mm-Q-Black Shade Cord (75 Feet Per Order)
1 x Part NM027A- 2" Tilter Fits Square Rod-Metal Stem
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NM036- Right Side 1 Inch Tilter
1 x #0.9mm-A-White Pleated Shade Cord-(75 Feet Per Order)
1 x Part 07- Installation Bracket (screws not included)
1 x #1.4mm-HH-Dark Walnut Cord(75 Feet Per Order)
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NM037 Cord Tilter For 1" Blind
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NR09B #10 Plastic Beaded Chain (100 Feet per Order)
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NR09C #10 Plastic Connector( Qty. 20 per Order)
1 x #White CordLoop A - 6 Feet Tall -Click Here For More Information
1 x #1.4mm-F-Oak Blind Cord(75 Feet Per Order)
1 x White Cord Loop B(6 Feet Tall) Click Here For More Information
1 x #2.7mm-D-Medium Walnut Cord (50 Feet Per Order)
1 x Part NM032A Replacement Hook 1" Tall (Quantity10)
1 x #1.8 mm cord size (click here for more information)
1 x Part NM034A- 1" Tilter Fit Hex Rod With Groove
1 x #1.4mm-B1-Alabaster Blind Cord (75 Feet Per Order)
1 x #0.9mm-B1-Alabaster Shade Cord(75 Feet Per Order)
1 x #1.4 mm cord size (click here for more information)
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x #1.8mm-I-Medium Walnut Cord (75 Feet Per Order)
1 x Part NM013C- 2" Wand Tilter
1 x Part 26 Large Installation Bracket (screws not included)
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x #0.9mm-L1-Indigo Blue Cord(75 Feet Per Order)
1 x #1.2mm-A-White Blind Cord (75 Feet Per Order)
1 x Part NR02- (Qty 6) Roman Shade Lock- 3 guides(screws not include
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x #2.7mm-E-Dark Walnut Cord(50 Feet Per Order)
1 x Part NM038C - 1' Wand Tilter
1 x Part- NM081 Dark Walnut Plug For 3/8" Hole(Qty. 20 Plugs)
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x #0.9mm-F11-Smokey Gray Shade Cord (75 Feet Per Order)
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NM015- White Wand Tilter For One Inch blind
1 x #1.4mm-A-White Blind Cord (75 Feet Per Order)
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
1 x #1.2 mm cord size (click here for more information)
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x #0.9mm-G-Pink Shade Cord(75 Feet Per Order)
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM043-Black Wand Tilter 2" With Hook
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part NR03- (Qty2)Clear Plastic Bar Eyelet
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NM040G- Valance Clip (Quantity 15)
1 x #1.8mm-K-Black Blind Cord (75 Feet Per Order)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x #0.9mm-D-Sand Shade Cord(75 Feet Per Order)
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x #2.7mm-A11- Alabaster Blind Cord (50 Feet Per Order)
1 x Part 32A Vertical Track Bracket
1 x White Cord Loop B (4 Feet Tall) Click Here For More Information
1 x Part NR01 (Qty10)Brown Cord Lock 3 Guides (screws not included)
1 x Part SVS92 White End Cap(1 pair)
1 x Part NR09 Cord Guide (screws not included)
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM006B- Wand Tilter For Levolor Blind
$1,437.58
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts