$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
1 x Part NP66L Black Motor Left Side (no returns or refunds)
1 x Part NP39- Tan Motor For Cordless Blind(no returns)
1 x Part NP62 cord guide
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x Part NP66 Right Side Black Motor (no returns or refunds)
1 x Part NP71A-Left Side Blue Cord Clutch
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NP76 Grey Motor (no returns)
1 x ANP11B - White Left Side Lock Body
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x YNP01A Right Side Cord lock (White Only)
1 x Part NP72G-White Left Side End Cap
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x Part NP67A- Right Side White Motor (no returns or refunds)
1 x Part NP07- Cord Guide 1 1/4" Wide
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x Part NP36C Off White Plastic Plug
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x #2.7mm-D-Medium Walnut Cord (50 Feet Per Order)
1 x #1.8mm-D-Sand Blind Cord(75 Feet Per Order)
1 x #0.9mm-F11-Smokey Gray Shade Cord (75 Feet Per Order)
1 x Part NV034 Luminette End Control Stem and Gear
1 x #1.4mm-HH-Dark Walnut Cord(75 Feet Per Order)
1 x Part 30A Brown Bracket LP (screws not included)
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x #1.4mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x #0.9mm-Q-Black Shade Cord (75 Feet Per Order)
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NV009A- Vertical End Control
1 x Part NV004- (Qty. 50)Vertical Slat Fabric Insert 3 3/8" Wide
1 x Part NV029-(Qty 7) Valance Clip Fits On Top Of A 1 7/8" Headrai
1 x #0.9mm-L1-Indigo Blue Cord(75 Feet Per Order)
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NM031C-1" Wand Tilter A
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NM006- Not Available (Compatible Tilter Will Ship Out)
1 x Part NV029J Valance Clips 3 per Order
1 x Part- NM016a-(Qty. 4)Clear Plastic Wand 30"(no returns)
1 x #2.7mm-A-White Blind Cord (50 Feet Per Order)
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part NR09A Small Cord Guide (screws not included)
1 x #1.4mm-D-Sand Blind Cord (75 Feet Per Order)
1 x Part NV023A-(Qty 3)Decomatic Vertical Carrier
1 x #0.9mm-A-White Pleated Shade Cord-(75 Feet Per Order)
1 x #1.8mm-K-Black Blind Cord (75 Feet Per Order)
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x #0.9mm-B1-Alabaster Shade Cord(75 Feet Per Order)
1 x #1.2mm-A-White Blind Cord (75 Feet Per Order)
$572.48
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts