$0.00

#0- 0.9mm Cord Size and Safety (click here for more information
[blind cord]

Multiple orders of the same cord will be on one spool. High quality replacement cord. 0.9mm cord is less than the size of the rim on a dime. Also visit the pleated shade parts and look for your cord lock it has the size that the. Or send me a sample of the cord with your email address. This product is high quality cord made for the window blind industry. Children and window covering cords don't mix. When cords are accessible to small children, these seemingly harmless products may become strangulation hazards. This is especially important with older window coverings that may not meet the latest national standard for window covering cord safety. If at all possible, use only cordless window coverings in homes where infants and young children are present. If you have corded window coverings and can't replace them with today's safer products, check them for the following hazards and order our free retrofit kits as needed. Move all cribs, beds, furniture and toys away from windows and window covering cords, preferably to another wall. Make sure that tasseled pull cords are as short as possible. Continuous-loop cords on draperies and vertical blinds should be permanently anchored to the floor or wall. Keep all window covering cords well out of the reach of children. Eliminate any dangling cords. Check that cord stops are properly installed and adjusted to limit the movement of inner lift cords.
Reviews
 
3 x Part NP06A- Left Side Small Cellular Cord Lock, Use 1.2mm Cord
3 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
2 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
2 x Part NP37A- Motor Lock
4 x Part NP16B Tape Only (160 feet)
2 x Part NP75 White Motor (no returns)
3 x Part NP65L Blue Motor Left Side (no returns or refunds)
3 x Part NP07- Cord Guide 1 1/4" Wide
2 x Part NP16A- Plug For Easy Rise Tape
3 x Part NP39- Tan Motor For Cordless Blind(no returns)
3 x Part NP44- Shaft And Connector For Ultraglide Shade
4 x Part NP72H-White Right Side End Cap
2 x ANP11A - Vanilla Left Side Lock Body
3 x Part NP63L Green Motor Left Side (no returns or refunds)
3 x Part NP72F-Vanilla Left Side End Cap
2 x Part NP03E-Clear Plastic Stopball (Qty 10)
3 x YNP01C Left Side Cord lock (White only)
4 x ANP11B - White Left Side Lock Body
3 x Part NP67A- Right Side White Motor (no returns or refunds)
2 x Part NP66 Right Side Black Motor (no returns or refunds)
3 x YNP01B Left Side Cord lock (White only)
3 x ANP09-Hunter Douglas Large Pleat Cord Lock Left, Use 0.9mm Cord
3 x Part NP05A Cord Wedge
4 x Part NP72I White Right Cord Clutch Cover
2 x YNP01D-Right Del Mar Green Lock
3 x Part NP66L Black Motor Left Side (no returns or refunds)
2 x Part NP02- C Clamp For Cord Loop System
2 x Part NP36B White Plastic Plug
3 x YNP01E-Del Mar Vanilla Left Side
3 x Part NP10A- Cord Guide 1 3/4" Wide
3 x ANP10A - White Right Side Body Cover
3 x Part NP72D-Off White Right Side End Cap
3 x YNP01A Right Side Cord lock (White Only)
2 x Part NP62 cord guide
2 x YNP01G-(1)Cord Guide
2 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
3 x Part NP72G-White Left Side End Cap
3 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
3 x Part NP23 (Qty 1) Clutch Cover
4 x Part NP72J White Left Cord Clutch Cover
1 x Part NV030- Valance Corner
1 x Part NV007- Vertical Track Kirsch Carrier(Salvaged Part)
1 x Part NV002C End Control With Chain
1 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x Part NV029A (Qty 3) Valance clip
1 x Part 08- Silhouette Installation Bracket (screws not included)
1 x Part NV003C- Clear Plastic Vertical Slat Fabric Insert
1 x Part NV002 Vertical Track End Control
1 x Part NV031 -Replacement Stem (Qyt 1 Stem Only)
1 x Part NV036A Click On Picture For Information (Qty 5 Per Order)
1 x Part NV001-100 Clips(no returns)
1 x Part NV002-Discontinued (A Compatible Control) Will Ship Out
1 x Part NV009A- Vertical End Control
1 x Part NV038 Vertical Track Carrier (Qty 1 Per Order)
1 x Part NV029D (Qty 3) Valance Clip
1 x Part NV026- #10 Vertical Chain $.99 Per Foot
1 x Part NV002A-(Qty 5) Carrier With Plastic Scissors Black Wheels
1 x Part NV028-(Qty 7) Clip Fits 1 1/2" Headrail
1 x Part NV002A2 (Qty 5) Carrier With Plastic Scissors Blue Wheels
1 x Part NV034 Luminette End Control Stem and Gear
1 x Part NV009- Vertical Track Laserlite Barrel For End Control
1 x Part 34 Installation Bracket
1 x Part 25 Small Installation Backet (screws not included)
1 x Part NV014- Silver Vertical Repair Clip
1 x Part NV004A- Plastic Link For Carrier 3 5/16" Long
1 x Part NV029-(Qty 7) Valance Clip Fits On Top Of A 1 7/8" Headrai
1 x Part NV005- Carrier Uses Plastic Link
1 x Part NV002B Vertical Track End Control Notchless
1 x Part NV027-#10 Vertical Chain Connector
1 x Part NV014A- White Vertical Repair Clip
1 x Part 33A Vertical Track Bracket
1 x Part NV030A- Valance Corner
1 x Part 36 Pleated Shade Bracket (1)
1 x Part NV012B1- Plastic Link
1 x Part NV001A Fabric Weight
1 x Part NV002A3 (Qty 2) Carrier With Plastic Scissors White Wheels
1 x Part NV003- Small Vertical Track End Control
1 x Part NV004- (Qty. 50)Vertical Slat Fabric Insert 3 3/8" Wide
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
1 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
1 x Part NV023C-(Qty 2)Vertical Clip And Base
1 x Part NV029H-(Qty 5) Valance Clip
1 x Part NV021- Lock Washer
1 x Part NV029J Valance Clips 3 per Order
1 x Part NV031B-Metal Link For 3dayblind Carrier
1 x Part NV017A-Open Bead For 2.2mm Vertical Cord
1 x Part 32A Vertical Track Bracket
1 x Part NV014B- Clear Plastic Slat Repair Tab
1 x Part NV004B- Plastic Link For Carrier 3 5/8" Long
1 x Part NV010- Vertical Track Sprocket (Qty 1)
1 x Part NV005B- Vertical End Cap For Hunter Douglas
1 x Part NV003B- (Qty 10)Small Vertical Track Carrier
1 x Part NV021a- Vertical Stopper
1 x Part 07A- (Qty 1) Pleated Shade Bracket (screws not included)
1 x Part NV037 Click On Picture For Information(Qty 5 Per Order)
2 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x Part NP36C Off White Plastic Plug
2 x Part NP39A stopper
2 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
2 x Part NP65 Right Side Blue Motor (no returns or refunds)
1 x Part NP07A Wear Bar
1 x Part SVS92 White End Cap(1 pair)
1 x Part NP03D Plastic Washer 1/4" Outside Diameter
1 x Part SVS6 White End Cap(1 pair)
1 x Part NP71 Off White Left Cord Clutch Cover
1 x Part NP72B-Right Side Blue Cord Clutch
1 x Part NP06E- Off White/Vanilla Cover For Large Cord Lock
1 x Part NP71A-Left Side Blue Cord Clutch
2 x Part NP08a -New style guide(you must drill out grommet to fit)
2 x #V013A (Qty 25) Cord Holder (screws not included)
2 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x #0- 0.9mm Cord Size and Safety (click here for more information
1 x White - Cord Loop B(5 Feet Tall) Click Here For More Information
1 x #0.9mm-Q-Black Shade Cord (75 Feet Per Order)
1 x Go To Roman And Woven Wood Parts
1 x #1.8mm-J-Dark Walnut Cord (75 Feet Per Order)
1 x #0.9mm-H-Peach Blush Cord(75 Feet Per Order)
1 x Part NR09B #10 Plastic Beaded Chain (100 Feet per Order)
1 x #0.9mm-N-Dark Brown Cord (75 Feet Per Order)
1 x Part NP36A Clear Plastic Plug
1 x #2.7mm-A11- Alabaster Blind Cord (50 Feet Per Order)
1 x Part NR03- (Qty2)Clear Plastic Bar Eyelet
1 x #0.9mm-C-Vanilla Shade Cord(75 Feet Per Order)
1 x #2.2mm*Vertical Track Cord* (50 Feet Per Order)
1 x Part NR09 Cord Guide (screws not included)
1 x #2.7 mm cord size (click here for more information)
1 x #1.4 mm cord size (click here for more information)
1 x #1.8 mm cord size (click here for more information)
1 x #1.2 mm cord size (click here for more information)
1 x Part NR08 Plastic Sew On Ring 5/8"
1 x #1.8mm-K-Black Blind Cord (75 Feet Per Order)
1 x #1.8mm-A-White Blind Cord (75 Feet Per Order)
1 x YNP01EF-Metal Cord Guide
1 x #2.7mm-A3- Sand Blind Cord (50 Feet Per Order)
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x #2.7mm-E-Dark Walnut Cord(50 Feet Per Order)
1 x # Threading Tool
1 x #White CordLoop A - 6 Feet Tall -Click Here For More Information
1 x #1.4mm-D-Sand Blind Cord (75 Feet Per Order)
1 x #1.4mm-HH-Dark Walnut Cord(75 Feet Per Order)
1 x #1.8mm-H-Oak Blind Cord (75 Feet Per Order)
1 x Part NP76 Grey Motor (no returns)
1 x Part NR09A Small Cord Guide (screws not included)
1 x #1.4mm-C-Vanilla Blind Cord (75 Feet Per Order)
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x #1.8mm-I-Medium Walnut Cord (75 Feet Per Order)
1 x Part NR01 (Qty10)Brown Cord Lock 3 Guides (screws not included)
1 x #2.7mm-A-White Blind Cord (50 Feet Per Order)
$3,415.71
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts