$4.99

Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
[levolor]

Part NM011C-(Qty. 20)Clear Plastic End Cap On Right Replaces Lef
You will receive 20 of the clear plastic end caps. These replace the end cap on the left side of the picture. This end cap fits inside the rail and is a tight fit. Works great if you are using hold down brackets.
Reviews
 
1 x Part NP16A- Plug For Easy Rise Tape
1 x Part NV017A-Open Bead For 2.2mm Vertical Cord
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x ANP11A - Vanilla Left Side Lock Body
1 x YNP01EF-Metal Cord Guide
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NV027-#10 Vertical Chain Connector
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NV036A Click On Picture For Information (Qty 5 Per Order)
1 x Part NV023A-(Qty 3)Decomatic Vertical Carrier
1 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
1 x Part NV014B- Clear Plastic Slat Repair Tab
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NV002 Vertical Track End Control
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x Part NP76 Grey Motor (no returns)
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NV002-Discontinued (A Compatible Control) Will Ship Out
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x YNP01B Left Side Cord lock (White only)
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
1 x Part NV023- Vertical End Cap
1 x Part NV029G-(Qty 4) Valance Clip
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM013D Wand Tilter
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NP72H-White Right Side End Cap
1 x Part NP71 Off White Left Cord Clutch Cover
1 x Part NP36A Clear Plastic Plug
1 x YNP01C Left Side Cord lock (White only)
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NP10A- Cord Guide 1 3/4" Wide
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part NP72F-Vanilla Left Side End Cap
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part NM012A Cord Tilter High Profile
1 x Part NV001-100 Clips(no returns)
1 x Part NV034 Luminette End Control Stem and Gear
1 x Part NM042- White Wand Tilter 2" With Hook
1 x Part NV037 Click On Picture For Information(Qty 5 Per Order)
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x Part NM004A-Hunter Douglas Cord Tilter
1 x Part NP37A- Motor Lock
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part NV021a- Vertical Stopper
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NV004A- Plastic Link For Carrier 3 5/16" Long
1 x Part NV029D (Qty 3) Valance Clip
1 x Part NV016-2.2 mm Track Cord (100 Feet per Order)
1 x Part 34 Installation Bracket
1 x Part NV002A-(Qty 5) Carrier With Plastic Scissors Black Wheels
1 x Part NV012B1- Plastic Link
1 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
$620.20
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts