$14.99

Part NP67A- Right Side White Motor (no returns or refunds)

Part NP67A- Right Side White Motor (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part NV014B- Clear Plastic Slat Repair Tab
1 x Part NV023A-(Qty 3)Decomatic Vertical Carrier
1 x Part NV009- Vertical Track Laserlite Barrel For End Control
1 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x Part 26 Large Installation Bracket (screws not included)
1 x Part NR09C #10 Plastic Connector( Qty. 20 per Order)
1 x Part NV021- Lock Washer
1 x Part NV012B1- Plastic Link
1 x Part NV028-(Qty 7) Clip Fits 1 1/2" Headrail
1 x Part NV002B Vertical Track End Control Notchless
1 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
1 x Part NV014- Silver Vertical Repair Clip
1 x Part NV002-Discontinued (A Compatible Control) Will Ship Out
1 x Part NV029F-(Qty 5) Valance Clip 1 1/2" Rail
1 x Part NV034 Luminette End Control Stem and Gear
1 x Part NV016-2.2 mm Track Cord (100 Feet per Order)
1 x Part NV029J Valance Clips 3 per Order
1 x Part NV003C- Clear Plastic Vertical Slat Fabric Insert
1 x Part NV038 Vertical Track Carrier (Qty 1 Per Order)
1 x Part NV036A Click On Picture For Information (Qty 5 Per Order)
1 x Part NV037 Click On Picture For Information(Qty 5 Per Order)
1 x Part NV021a- Vertical Stopper
1 x Part NV004A- Plastic Link For Carrier 3 5/16" Long
1 x Part NV002 Vertical Track End Control
1 x Part NV030- Valance Corner
1 x Part NR09B #10 Plastic Beaded Chain (100 Feet per Order)
1 x Part NV021B - Decomatic Black Lock Washer
1 x Part NV010- Vertical Track Sprocket (Qty 1)
1 x Part NM003BB1-Hunter Douglas Compatible Ships Out
1 x Part NP72F-Vanilla Left Side End Cap
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NP72J White Left Cord Clutch Cover
1 x Part NP03H- Cord Tassel Clear Plastic 3/4" Tall
1 x Part NP44- Shaft And Connector For Ultraglide Shade
1 x Part NM014B- Cord Tilter Fits Triangle Rod
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NM038-White Wand Tilter For 1" Blind(new version ships out)
1 x Part NP65L Blue Motor Left Side (no returns or refunds)
1 x Part NP72H-White Right Side End Cap
1 x Part NM040J- Valance Clip (Quantity 15)
1 x Part NM012- 2" Wand Tilter For Low Profile
1 x Part- NM009C2 Light Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM031C-1" Wand Tilter A
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NP05A Cord Wedge
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM008 - Wand Tilter
1 x Part NP66 Right Side Black Motor (no returns or refunds)
1 x YNP01C Left Side Cord lock (White only)
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x YNP01D-Right Del Mar Green Lock
1 x Part NM003BB- Hunter Douglas (Compatible Part Ships Out)
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x ANP11B - White Left Side Lock Body
1 x Part NM007- Cord Tilter For 2 Inch Blind (Fits Low Prof
1 x Part NP36B White Plastic Plug
1 x Part NM011D-(Qty. 5 pair) Hold Down Bracket
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NP39- Tan Motor For Cordless Blind(no returns)
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x ANP10-Hunter Douglas Large Pleat Cord Lock Right, Use 0.9mm Cord
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NP71A-Left Side Blue Cord Clutch
1 x Part NM041G Valance Clip 2" Tall (Quantity 15)
1 x Part NP76 Grey Motor (no returns)
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part NM038D - 1" Wand Tilter
1 x Part NP16A- Plug For Easy Rise Tape
1 x Part NP71 Off White Left Cord Clutch Cover
1 x Part NM040H- Valance Clip (Quantity 15)
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x Part NM038A - Alabaster Wand Tilter For 1" Blind
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NM003D Wand Tilter For 3" Slat, Fits Square Rod
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part NP65 Right Side Blue Motor (no returns or refunds)
1 x Part NM038E - 1" Wand Tilter
1 x Part NP06D-Left Side Side Large Cord Lock, Uses 1.2mm Cord
1 x Part NM012C- Discontinued New Version Will Ship Out
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NP75 White Motor (no returns)
1 x ANP11A - Vanilla Left Side Lock Body
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NM031D- 1" Wand Tiler With Clutch
1 x Part NM027- Discontinued (A Compatible Tilter) Will Ship Out
$1,025.15
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts