$14.99

Part NP63L Green Motor Left Side (no returns or refunds)

Part NP63L Green Motor Left Side (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part NM046- Craddle For Low Profile (Quantity 10)
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NM006B- Wand Tilter For Levolor Blind
1 x Part NM043A-Loop Type Wand Tilter
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NM013B-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part 36 Pleated Shade Bracket (1)
1 x Part 08- Silhouette Installation Bracket (screws not included)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM046-Discontinued (A Compatible Ships) (Quantity 10)
1 x Part- NM009C3 Clear Plastic Tassel 1 1/4" Tall(10 per order)
1 x Part NM012A Cord Tilter High Profile
1 x Part NM008 - Wand Tilter
1 x Part NM005A Cord Tilter Fits Hex Rod
1 x Part NM012C-2" Wand Tilter For Low Profile Fits Hex Rod
1 x Part NM005D Cord Tilter For 2" Blind
1 x Part NR09A Small Cord Guide (screws not included)
1 x Part NM011C-(Qty. 20)Clear Plastic End Cap
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NM038E - 1" Wand Tilter
1 x Part NM041F Valance Clip 1 3/4" Tall (Quantity 15)
1 x Part NM041B 3" Valance Clip For Wood Valance (Quantity 15)
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NM003AA- Cord Lock for 2" Blind
1 x Part 32A Vertical Track Bracket
1 x Part NM011H-10 Pair Hold Down Brackets (screws not included)
1 x Part NM014A- Wand Tilter For 2" High Profile
1 x Part NM040G- Valance Clip (Quantity 15)
1 x Part NM035- 1 Inch Wand Tilter Left Side
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part 26 Large Installation Bracket (screws not included)
1 x Part- NM084 White Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part- NM053 Del Mar Mini Blind Cord Lock Left Side
1 x Part- NM080 Clear Plastic Plug Fits 3/4" Hole
1 x Part 07A- (Qty 1) Pleated Shade Bracket (screws not included)
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NM041K Clip For 2 1/2" Valance (Quantity 15)
1 x Part 33A Vertical Track Bracket
1 x Part NM028- 2" Wand Tilter Fits Square Rod High Profile
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
1 x ANP11A - Vanilla Left Side Lock Body
1 x Part NV015- Top Plug For Vertical Fabric
1 x Part NV030- Valance Corner
1 x Part NV028-(Qty 7) Clip Fits 1 1/2" Headrail
1 x YNP01D-Right Del Mar Green Lock
1 x Part NV007- Vertical Track Kirsch Carrier(Salvaged Part)
1 x Part NV037 Click On Picture For Information(Qty 5 Per Order)
$496.74
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts