$9.99

Part NP39- Tan Motor For Cordless Blind(no returns)
[blinds parts]

Part NP39-  Tan Motor For Cordless Blind(no returns)
You should replace the trans and all motors. I find cordless shade parts difficult to replace. I have damaged more that one replacement part, when repair one shade. No returns or refunds on all cordless shade parts. It's best to replace all the motors and the trans. To replace motor or trans, pull shade down. Lock up motor, so not to release the tension. Remove trans with motor. Replace damaged parts and reinstall. Remove any locking pins or motor locks.
Reviews
 
1 x Part NV029H-(Qty 5) Valance Clip
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part NM041F-Right Side Replaces The Left Side (Quantity 15)
1 x Part NM043C -Not Available (Compatible Tilter Will Ship Out)
1 x Part- NM083 Oak Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NV029D (Qty 3) Valance Clip
1 x Part NV029-(Qty 7) Valance Clip Fits On Top Of A 1 7/8" Headrai
1 x Part NV021- Lock Washer
1 x Part NM004A-Discontinued (new version will ship out)
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NV014A- White Vertical Repair Clip
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NM013D Wand Tilter
1 x Part NV030- Valance Corner
1 x Part NV016-2.2 mm Track Cord (100 Feet per Order)
1 x Part- NM019B (Qty. 4) 36" Clear Plastic Wand(No Returns)
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NM039-Barrel and Cradle For 1" Blind
1 x Part NM013C- 2" Wand Tilter
1 x Part NV029J Valance Clips 3 per Order
1 x Part NV002B Vertical Track End Control Notchless
1 x Part NM006- Cord Tilter For 2 inch Blind (Fits Square Slot)
1 x Part- NM087 Mini Blind Bottom Rail Plug
1 x Part NV003B- (Qty 10) Graber Small Vertical Track Carrier
1 x Part- NM019C (Qty. 4) White Plastic Wand 36"(no returns)
1 x Part NV004- (Qty. 50)Vertical Slat Fabric Insert 3 3/8" Wide
1 x Part NV010- Vertical Track Sprocket (Qty 1)
1 x Part NV012B1- Plastic Link
1 x Part NM013D- Compatible Tilter Ships Out
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x Part NV003C- Clear Plastic Vertical Slat Fabric Insert
1 x Part NV014- Silver Vertical Repair Clip
1 x Part- NM009H2 -Wand Tip and Hook (Quantity 12)
1 x Part NV029F-(Qty 5) Valance Clip 1 1/2" Rail
1 x Part NV013-(Qty 2) Vertical Cord Hold Down (screws not included)
1 x Part NP06C- Right Side Large Cord Lock, Use 1.2mm Cord
1 x #2.7mm-A-White Blind Cord (50 Feet Per Order)
1 x #V013A (Qty 25) Cord Holder (screws not included)
1 x # Threading Tool
1 x Part NP06- Right Side Small Cellular Cord Lock, Use 1.2mm Cord
1 x #1.8mm-J-Dark Walnut Cord (75 Feet Per Order)
1 x Part 33A Vertical Track Bracket
1 x YNP01D-Right Del Mar Green Lock
1 x YNP01B Left Side Cord lock (White only)
1 x Part NP70 Vista lock only for part NP68-69, I use 0.9 cord
1 x #0.9mm-B1-Alabaster Shade Cord(75 Feet Per Order)
1 x #2.2mm*Vertical Track Cord* (50 Feet Per Order)
1 x #1.4mm-H-Medium Walnut Cord(75 Feet Per Order)
1 x ANP11B - White Left Side Lock Body
1 x Part NP23 (Qty 1) Clutch Cover
1 x Part NP36C Off White Plastic Plug
1 x Part NP16B Tape Only (160 feet)
1 x Part NP72E Plastic Threaded Rod 4 1/2" Long
1 x Part NP72F-Vanilla Left Side End Cap
1 x Part NP27-Cream Left Side Cord Lock, Uses 1.2mm Cord
$690.22
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts