$14.99

Part NP66L Black Motor Left Side (no returns or refunds)

Part NP66L Black Motor Left Side (no returns or refunds)
No longer has a belt drive, only gears. The stem is connect to the motor. Basic instructions for replacement. Remove old motor, turn the rod that has the cord on it and stack the shade up. Lay the motor on the flat side with the screw pointing toward you. If the motor is on your right side, turn the white plastic barrel clockwise 1 to 2 times and install. If on the motor is on the left side, turn it counter clockwise 1 to 2 and install.
Reviews
 
1 x Part NP16A- Plug For Easy Rise Tape
1 x Part NV017A-Open Bead For 2.2mm Vertical Cord
1 x Part NM013- 2" Wand Tilter For Low Profile Fits Hex Rod
1 x ANP11A - Vanilla Left Side Lock Body
1 x YNP01EF-Metal Cord Guide
1 x Part NM012C-2" (Discontinued) A Compatible Tilter Will Ship Out
1 x Part- NM082 Medium Walnut Plug Fits 3/8" Hole(Qty. 20 Plugs)
1 x Part NV027-#10 Vertical Chain Connector
1 x Part- NM009H1 -Wand Tip (Quantity 12)
1 x Part NV036A Click On Picture For Information (Qty 5 Per Order)
1 x Part NV023A-(Qty 3)Decomatic Vertical Carrier
1 x Part NV036 Click On Picture For Information (Qty 4 Per Order)
1 x Part NV014B- Clear Plastic Slat Repair Tab
1 x Part NM005-Cord Tilter Fits Hex Rod
1 x Part NV002 Vertical Track End Control
1 x Part NP63L Green Motor Left Side (no returns or refunds)
1 x ANP11-Hunter Douglas Small Pleat Left Cord Lock, Use 0.9mm Cord
1 x Part NP76 Grey Motor (no returns)
1 x Part- NM009B White Wood Tassel 1 1/4" Tall (20 per order)
1 x Part NV002-Discontinued (A Compatible Control) Will Ship Out
1 x Part NM040J-Discontinued (A Compatible Ships) (Quantity 15)
1 x Part NM011A-Hook And Sleeve (Quantity 5)
1 x YNP01B Left Side Cord lock (White only)
1 x Part NV008- Vertical Track Kirsch Carrier For Vinyl Vanes
1 x Part NV023- Vertical End Cap
1 x Part NV029G-(Qty 4) Valance Clip
1 x Part NM031C-Discontinued (A Compatible Tilter) Will Ship Out
1 x Part NM013D Wand Tilter
1 x ANP12-Hunter Douglas Small Pleat Cord Lock Right Side, Use 0.9mm
1 x Part NP72H-White Right Side End Cap
1 x Part NP71 Off White Left Cord Clutch Cover
1 x Part NP36A Clear Plastic Plug
1 x YNP01C Left Side Cord lock (White only)
1 x Part NM011F-10 Pair Hold Down Brackets (screws not included)
1 x Part NM015- White Wand Tilter For One Inch blind
1 x Part- NM009C1 Medium Brown Wood Tassel 1 1/4" Tall(20 per order)
1 x Part NM041A Clip For 2 1/2" Wood Valance (Quantity 15)
1 x Part NP06B- Off White/Vanilla Cover For Small Lock
1 x Part NP10A- Cord Guide 1 3/4" Wide
$419.62
Share Product
Share via E-Mail Share on Facebook Share on Twitter Share on Digg

Instant SSL Certificate Secure Site

Official PayPal Seal

I'm here to make this site look good!

Copyright - 2024 Discount Blind Parts